[jaws-uk] Re: JAWS 60 acting up

Hi Phil.

Yes, that worked fine thank you.  Incidentally, I was able to delete the 
message by pressing the DEL key, that was until I had to get my computer 
fixed and reinstall jaws.  I obviously prefer the DEL option as it only 
required a single keystroke, but never mind, Control D from now on.  Thanks 
again .  Andy


----- Original Message ----- 
From: "Phil Medway" <philmedway@xxxxxxxxxxxxxxxx>
To: <jaws-uk@xxxxxxxxxxxxx>
Sent: Wednesday, December 13, 2006 12:45 PM
Subject: [jaws-uk] Re: JAWS 60 acting up


> Hi Andy,
>
> If you are using Outlook express for your mail, you need to use control+d 
> to
> delete a message that is open.
>
> HTH,
>
> Phil Medway
>
> philmedway@xxxxxxxxxxxxxxxx
>
> tel: 01869 347639
>
> mobile: 07980 519990
>
> Skype: philmedway
>
>
> ----- Original Message ----- 
> From: "David" <david.tregellas@xxxxxxxxxxxx>
> To: <jaws-uk@xxxxxxxxxxxxx>
> Sent: Wednesday, December 13, 2006 10:12 AM
> Subject: [jaws-uk] Re: JAWS 60 acting up
>
>
> Hi Andy,
>
> You may be able to get rid of the "Read Only" thing by going into Speech 
> and
> Sounds Manager.
>
> Get into your Configuration |Manager, Set Options then Speech and Sounds
> Manager.  Tab twice to an Edit button and press enter.  Do a control tab 
> and
> then press "R" once or twice and it will say "?Read Only".  Tab twice I
> think and cursor up or down until you find "Ignore".  Activate this and 
> exit
> in the usual way.  Hopefully, that should work.
>
> As for your second point I can't answer that but I can't delete from 
> inside
> a message either.
>
> Point three.  Go to your Verbosity Options with insert V and you should 
> find
> "Announce Header fields with Message" and this should be set to off.  When
> you then go into a message it should start immediately with the message.
>
> I'm often wrong about these things but best of luck anyway.
>
> Regards
>
> David
>
>
> -----Original Message-----
> From: jaws-uk-bounce@xxxxxxxxxxxxx
> [mailto:jaws-uk-bounce@xxxxxxxxxxxxx]On Behalf Of Andy Logue
> Sent: 12 December 2006 19:49
> To: jaws-uk@xxxxxxxxxxxxx
> Subject: [jaws-uk] JAWS 60 acting up
>
>
> Hi all.
>
> Not sure if my earlier message on this matter got through, so re-posting.
>
> I had to reinstall JAWS version 6.0 yesterday into my XP Home Edition
> computer after it crashed badly a few weeks ago.  I'm using Internet
> Explorer version 6.
>
> The problems:
>
> When I open a message, JAWS announces, within the text of the message, 
> Read
> Only.
>
> I am also unable to delete the message from within, by pressing the del 
> key.
> When I attempt this, JAWS beeps.
>
> Also, I normally, when opening a message, press tab a couple of times, to
> get to the main body and prevent the need to read the above headers. 
> Well,
> I am no longer able to do this and when I attempt to do so, JAWS beeps 
> when
> I press the tab key.
>
> It also appears that when I open a message, JAWS is at the bottom because 
> I
> hear often Original Message, prior to anything else.
>
> Any advise would be very welcome as this is driving me crazy.
>
> Best wishes.
> Andy
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** jaws-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** jaws-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** jaws-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> 


** To leave the list, click on the immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** jaws-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:jaws-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** jaws-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: