I do not know how to check the macro security. What I do know is that the commands are simply interpreted as text, meaning they are not in the command set for the new profile. From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On Behalf Of Ed. Rosenthal Sent: Saturday, February 16, 2013 6:17 AM To: j-say@xxxxxxxxxxxxx Subject: [j-say list] Re: Profile problem If JSay isn't responding to Speak Message I wouldn't think it was a config issue, unless it was somehow related to the results box autohide delay...you can check the command browser to make sure the command is present and perhaps check the macro security setting for the application(s) in question? -ed. From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On Behalf Of Gary Wunder Sent: Friday, February 15, 2013 1:13 PM To: j-say List Subject: [j-say list] Profile problem Yesterday I created a new profile. After it was created, I configured it for J-Say using that option from the J-Say Configuration Wizard. The profile works for some J-Say functions and not for others. Turning the microphone on and off gives me the correct sound, but saying "speak message" inserts that text into the document. The same is true with other speak commands. Where did I mess things up? Gary Gary Wunder, President National Federation of the Blind of Missouri gwunder@xxxxxxxxxxxxx