Re: Telnet thru ISA Server
- From: "Phill Hardstaff" <phillh@xxxxxxx>
- To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
- Date: Thu, 29 Aug 2002 19:41:32 +1100
Now create a protocol rule to allow Telnet out :)
Phill
Phill Hardstaff
MCSA, CCNA, A+, Network+, Inet+, Server+, CIW-Assoc.
Loggerythm Software
Phone +687-838091
Email phillh@xxxxxxxxxxxxxx
Web http://www.Loggerythm.com
Fax +1 (603) 299-5640
> -----Original Message-----
> From: rcr1@xxxxxxxxxxx [mailto:rcr1@xxxxxxxxxxx]
> Sent: Wednesday, 28 August 2002 9:46 PM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] Re: Telnet thru ISA Server
>
>
> http://www.ISAserver.org
>
>
> I have removed the packet filters. Still does not work.
>
> Regards... Rob
>
>
> ----- Original Message -----
> From: "Didi Lavi" <dlavi@xxxxxxxxxxxxxxx>
> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> Sent: Wednesday, August 28, 2002 3:55 PM
> Subject: [isalist] Re: Telnet thru ISA Server
>
>
> > http://www.ISAserver.org
> >
> >
> > Why u use packet filter ?
> > Try to cancel the packet filter and then try again
> > Didi
> > MCSE 4, 2K
> >
> > ----- Original Message -----
> > From: <rcr1@xxxxxxxxxxx>
> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> > Sent: Tuesday, August 27, 2002 12:11 PM
> > Subject: [isalist] Telnet thru ISA Server
> >
> >
> > > http://www.ISAserver.org
> > >
> > >
> > > Hi,
> > >
> > > I am running Win 2000 SBS using ISA Server. I cannot telnet to a
> > > linux server on the outside of my network on port 23, but I can
> > > telnet to it
> on
> > > port 110 from either the server running ISA or from any pc on the
> internal
> > > network.
> > >
> > > I have tested telnet on port 23 to the server from a pc
> outside of
> > > my network and it works fine.
> > >
> > > I have an outbound telnet packet filter to allow all
> local ports to
> remote
> > > TCP port 23, and an inbound telnet packet filter to block inbound
> attempts
> > > at local port 23 from any remote port. I also have a
> telnet protocol
> rule
> > > set to allow the telnet protocol only.
> > >
> > > Any ideas?
> > >
> > > Thanks... Rob
> > >
> > >
> > > ------------------------------------------------------
> > > You are currently subscribed to this ISAserver.org
> Discussion List
> > > as:
> > dlavi@xxxxxxxxxxxxxxx
> > > To unsubscribe send a blank email to
> $subst('Email.Unsub')
> > >
> >
> >
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org
> Discussion List as:
> rcr1@xxxxxxxxxxx
> > To unsubscribe send a blank email to
> > $subst('Email.Unsub')
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion
> List as: phillh@xxxxxxx To unsubscribe send a blank email to
> $subst('Email.Unsub')
>
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.384 / Virus Database: 216 - Release Date: 21/08/2002
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.384 / Virus Database: 216 - Release Date: 21/08/2002
Other related posts:
