Re: Telnet thru ISA Server

Why u use packet filter ?
Try to cancel the packet filter and then try again
Didi
MCSE 4, 2K

----- Original Message -----
From: <rcr1@xxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Tuesday, August 27, 2002 12:11 PM
Subject: [isalist] Telnet thru ISA Server


> http://www.ISAserver.org
>
>
> Hi,
>
> I am running Win 2000 SBS using ISA Server.  I cannot telnet to a linux
> server on the outside of my network on port 23, but I can telnet to it on
> port 110 from either the server running ISA or from any pc on the internal
> network.
>
> I have tested telnet on port 23 to the server from a pc outside of my
> network and it works fine.
>
> I have an outbound telnet packet filter to allow all local ports to remote
> TCP port 23, and an inbound telnet packet filter to block inbound attempts
> at local port 23 from any remote port. I also have a telnet protocol rule
> set to allow the telnet protocol only.
>
> Any ideas?
>
> Thanks... Rob
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
dlavi@xxxxxxxxxxxxxxx
> To unsubscribe send a blank email to $subst('Email.Unsub')
>



Other related posts: