Hi David, So far, no other problems. Might have been gremlins because I haven't seen anything weird today. Will keep watch and report any future strangeness. Thanks! Tom www.isaserver.org/shinder -----Original Message----- From: David Kusner [mailto:davek@xxxxxxxxxxxxxxx] Sent: Friday, February 22, 2002 1:02 AM To: [ISAserver.org Discussion List] Subject: [isalist] Re: Strange Magic post SP1a http://www.ISAserver.org Hi Tom So are you saying in not so many words that the "re-release" of SP1 is not better than the first attempt? I have decided to take a back set on the SP1 for a while to see what the other users have to say. At Present my ISA is about 98% stable, so I do not want to rock the boat like I did the first time I installed SP1 and SMPT stopped working! Regards David Kusner ----- Original Message ----- From: "Greg Mulholland" <duke@xxxxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Thursday, February 21, 2002 12:33 PM Subject: [isalist] Re: Strange Magic post SP1a > http://www.ISAserver.org > > > Tom > > Just read your post, as I am catching up on my older 700 mails (hehe) > > I have not as yet had any problems with sp1, but now im not sure that i want > to go to sleep now. haha > > It must just be that it doesn't like you. > > Greg Mulholland > > > > ----- Original Message ----- > From: "Thomas W. Shinder" <tshinder@xxxxxxxxxxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Sent: Thursday, February 21, 2002 1:01 AM > Subject: [isalist] Strange Magic post SP1a > > > http://www.ISAserver.org > > > Hey everyone, > > I installed SP1a the night it became available. No problems until this > A.M. Here's the story: > > Everything was fine since installation. I finished up my scribblings for > the day at 4AM today. The last thing I did before going to bed was surf > the ISAserver.org site (of course!). No problem with that. > > I got up at 6AM today to get started on a new project, and the first > thing I did was go to the ISAserver.org site (of course!). I got a 404. > huh? Then I tried another site and got the same thing. > > Next thing I did was open a command prompt and type ftp > ftp.microsoft.com and got an error (like a dolt, I did not write down > the error but the gist was that it could not connect). Interesting. HTTP > and FTP didn't work. > > Next, tried an nslookup, and that didn't work either. > > Hmmm. How about a non-TCP/UDP protocol? OK -- I ping the internal > interface of the ISA Server and its works! Yeah! Now let's see if the > ISA Server is whack: ping www.dallas.net and get a response. OK, so the > firewall service is still working on the ISA Server. > > Since it seems like the ISA Server is working, I try to open a Terminal > Services session to the ISA Server and get an almost immediate response > that the connection cannot be established. Great. :-( > > Next, I go back to the command prompt and do a ROUTE PRINT. Nothing > abnormal there. Then an IPCONFIG /ALL. Nothing wrong there. Check the > Event Log. It shows some authentication problems related to the fact > that the machine isn't able to connect to the DCs on the network. > > Maybe disabling the NIC and re-enabling it will work. Nope! How about > that strange "repair the connection" command when you see when you right > click the NIC icon in the Dial-up and Network connections dialog box? No > workie either. > > Hey! Maybe the Firewall client is whack. I try to refresh the > configuration and I get the message that essentially says it can't > communicate with the ISA Server, and that maybe I have the wrong version > or something (i.e., not helpful). OK, thinking that the machine is > possessed, I exorcise it by hard booting the sucker. > > After restarting I use the LKG config "just in case". Everything is > working fine, I think. That is to say, everything that I've tried to do > so far is working, although during system boot my network connections > didn't come online immediately and I received an error message to this > effect via a tray icon (Although I think the tray went to court and > officially changed its name to 'notification area' as part of the > divorce agreement between Windows XP and Win9x/Windows 2000). > > Anyhow, to make a long story short, I have no idea what happened during > those two short hours of sleep, but I "suspect" that the Firewall client > had a hand in this since only TCP/UDP protocols were affected. Please > tell me that NONE of you have had this problem since installing SP1a and > that this was an isolated random error that I will never see again. > > Thanks for watching, > Tom > www.isaserver.org/shinder > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > duke@xxxxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: davek@xxxxxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')