Re: "ISA Server Control Service" Fails

Ahh, I didn't realize you were already established.
I've heard of a similar issue; lemme look into it..

Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
Read the books!
  ----- Original Message ----- 
  From: Chhatwal, Raminder S. 
  To: [ISAserver.org Discussion List] 
  Sent: Tuesday, May 28, 2002 7:19 AM
  Subject: [isalist] Re: "ISA Server Control Service" Fails


  http://www.ISAserver.org


  Jim, 

  I cannot run "msisaent.exe" as I have a enterprise policy in place and 3 
existing arrays with 6 servers. I am trying to add one more server to one of 
the arrays. AD Controllers have SP2 installed.



  Thanks

  Raminder.



  -----Original Message-----
  From: Jim Harrison [mailto:jim@xxxxxxxxxxxx] 
  Sent: Tuesday, May 28, 2002 9:52 AM
  To: [ISAserver.org Discussion List]
  Subject: [isalist] Re: "ISA Server Control Service" Fails



  http://www.ISAserver.org

  Try rerunning "msisaent.exe" from the ISA CD; it sounds like your schema 
changes got buggered...

  Are you running SP2 on your W2K AD controller?

  You may also have to reinstall ISA afterwards...



  Jim Harrison
  MCP(NT4, W2K), A+, Network+, PCG
  http://isaserver.org/authors/harrison/
  Read the books!





  ----- Original Message ----- 

  From: Chhatwal, Raminder S. 

  To: [ISAserver.org Discussion List] 

  Sent: Tuesday, May 28, 2002 6:45 AM

  Subject: [isalist] "ISA Server Control Service" Fails



  http://www.ISAserver.org

  Hi all,



  I am facing a peculiar problem. After installing ISA and joining it to an 
array, "ISA Server Control Service" fails and gives out the following errors on 
the event log. I have tried again and again, rebuilt the servers number of 
times with the same results. Any help would be appreciated.



  Thanks

  Raminder



  Microsoft ISA Server Control failed. The failure occurred during Log files 
sweeping because the configuration property Secure-Items of the key 
LDAP://DC1.xyz.com/CN={02D04266-CAEE-41BD-ACF6-A2348D0D7729},CN=Servers,CN={9A490D1E-E6B4-4B2C-B15E-D754B12D60E2},CN=Arrays,CN=Fpc,CN=System,DC=xyz,DC=com
 could not be accessed. Use the source location 3.1061.3.0.1200.50 to report 
the failure. The error code in the Data area of the event properties indicates 
the cause of the failure. For more information about this event, see ISA Server 
Help. The error description is: The system cannot find the file specified.





  Microsoft ISA Server Control failed to start. The failure occurred during 
Creation of logging module because the configuration property Secure-Items of 
the key 
LDAP://DC1.xyz.com/CN={02D04266-CAEE-41BD-ACF6-A2348D0D7729},CN=Servers,CN={9A490D1E-E6B4-4B2C-B15E-D754B12D60E2},CN=Arrays,CN=Fpc,CN=System,DC=xyz,DC=com
 could not be accessed. Use the source location 3.1061.3.0.1200.50 to report 
the failure. The error code in the Data area of the event properties indicates 
the cause of the failure. For more information about this event, see ISA Server 
Help. The error description is: The system cannot find the file specified.



  The Microsoft ISA Server Control service terminated with the following error: 

  The handle is invalid.  





  ------------------------------------------------------
  You are currently subscribed to this ISAserver.org Discussion List as: 
jim@xxxxxxxxxxxx
  To unsubscribe send a blank email to $subst('Email.Unsub') 

Other related posts: