Re: "ISA Server Control Service" Fails

From: "Chhatwal, Raminder S." <Raminder.Chhatwal@xxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Date: Tue, 28 May 2002 10:00:49 -0400
Jim, 

I cannot run "msisaent.exe" as I have a enterprise policy in place and 3
existing arrays with 6 servers. I am trying to add one more server to
one of the arrays. AD Controllers have SP2 installed.

 

 

 

-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx] 
Sent: Tuesday, May 28, 2002 9:52 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: "ISA Server Control Service" Fails

 

http://www.ISAserver.org

Try rerunning "msisaent.exe" from the ISA CD; it sounds like your schema
changes got buggered...

Are you running SP2 on your W2K AD controller?

You may also have to reinstall ISA afterwards...

 

Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
Read the books!

        ----- Original Message ----- 

        From: Chhatwal, Raminder S.
<mailto:Raminder.Chhatwal@xxxxxxxxxxx>  

        To: [ISAserver.org Discussion List]
<mailto:isalist@xxxxxxxxxxxxx>  

        Sent: Tuesday, May 28, 2002 6:45 AM

        Subject: [isalist] "ISA Server Control Service" Fails

         

        http://www.ISAserver.org

        Hi all,

         

        I am facing a peculiar problem. After installing ISA and joining
it to an array, "ISA Server Control Service" fails and gives out the
following errors on the event log. I have tried again and again, rebuilt
the servers number of times with the same results. Any help would be
appreciated.

         

        Thanks

        Raminder

         

        Microsoft ISA Server Control failed. The failure occurred during
Log files sweeping because the configuration property Secure-Items of
the key
LDAP://DC1.xyz.com/CN={02D04266-CAEE-41BD-ACF6-A2348D0D7729},CN=Servers,
CN={9A490D1E-E6B4-4B2C-B15E-D754B12D60E2},CN=Arrays,CN=Fpc,CN=System,DC=
xyz,DC=com could not be accessed. Use the source location
3.1061.3.0.1200.50 to report the failure. The error code in the Data
area of the event properties indicates the cause of the failure. For
more information about this event, see ISA Server Help. The error
description is: The system cannot find the file specified.

         

         

        Microsoft ISA Server Control failed to start. The failure
occurred during Creation of logging module because the configuration
property Secure-Items of the key
LDAP://DC1.xyz.com/CN={02D04266-CAEE-41BD-ACF6-A2348D0D7729},CN=Servers,
CN={9A490D1E-E6B4-4B2C-B15E-D754B12D60E2},CN=Arrays,CN=Fpc,CN=System,DC=
xyz,DC=com could not be accessed. Use the source location
3.1061.3.0.1200.50 to report the failure. The error code in the Data
area of the event properties indicates the cause of the failure. For
more information about this event, see ISA Server Help. The error
description is: The system cannot find the file specified.

         

        The Microsoft ISA Server Control service terminated with the
following error: 

        The handle is invalid.  

         

         

        ------------------------------------------------------
        You are currently subscribed to this ISAserver.org Discussion
List as: jim@xxxxxxxxxxxx
        To unsubscribe send a blank email to
$subst('Email.Unsub') 

------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
raminder.chhatwal@xxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Re: "ISA Server Control Service" Fails

Other related posts:
