Jim, I cannot run "msisaent.exe" as I have a enterprise policy in place and 3 existing arrays with 6 servers. I am trying to add one more server to one of the arrays. AD Controllers have SP2 installed. Thanks Raminder. -----Original Message----- From: Jim Harrison [mailto:jim@xxxxxxxxxxxx] Sent: Tuesday, May 28, 2002 9:52 AM To: [ISAserver.org Discussion List] Subject: [isalist] Re: "ISA Server Control Service" Fails http://www.ISAserver.org Try rerunning "msisaent.exe" from the ISA CD; it sounds like your schema changes got buggered... Are you running SP2 on your W2K AD controller? You may also have to reinstall ISA afterwards... Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/authors/harrison/ Read the books! ----- Original Message ----- From: Chhatwal, Raminder S. <mailto:Raminder.Chhatwal@xxxxxxxxxxx> To: [ISAserver.org Discussion List] <mailto:isalist@xxxxxxxxxxxxx> Sent: Tuesday, May 28, 2002 6:45 AM Subject: [isalist] "ISA Server Control Service" Fails http://www.ISAserver.org Hi all, I am facing a peculiar problem. After installing ISA and joining it to an array, "ISA Server Control Service" fails and gives out the following errors on the event log. I have tried again and again, rebuilt the servers number of times with the same results. Any help would be appreciated. Thanks Raminder Microsoft ISA Server Control failed. The failure occurred during Log files sweeping because the configuration property Secure-Items of the key LDAP://DC1.xyz.com/CN={02D04266-CAEE-41BD-ACF6-A2348D0D7729},CN=Servers, CN={9A490D1E-E6B4-4B2C-B15E-D754B12D60E2},CN=Arrays,CN=Fpc,CN=System,DC= xyz,DC=com could not be accessed. Use the source location 3.1061.3.0.1200.50 to report the failure. The error code in the Data area of the event properties indicates the cause of the failure. For more information about this event, see ISA Server Help. The error description is: The system cannot find the file specified. Microsoft ISA Server Control failed to start. The failure occurred during Creation of logging module because the configuration property Secure-Items of the key LDAP://DC1.xyz.com/CN={02D04266-CAEE-41BD-ACF6-A2348D0D7729},CN=Servers, CN={9A490D1E-E6B4-4B2C-B15E-D754B12D60E2},CN=Arrays,CN=Fpc,CN=System,DC= xyz,DC=com could not be accessed. Use the source location 3.1061.3.0.1200.50 to report the failure. The error code in the Data area of the event properties indicates the cause of the failure. For more information about this event, see ISA Server Help. The error description is: The system cannot find the file specified. The Microsoft ISA Server Control service terminated with the following error: The handle is invalid.