RE: Dial Up Problem + ISA
- From: "Richard Pettigrew" <Richard@xxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Mon, 14 Jan 2002 14:45:43 -0000
I have noticed Firewall Sessions staying active even after closing the
application on the client PC that used the Firewall Client to gain
access outwards. I had to manually close it. I know this may not sound
like much help, but perhaps it may be something to look into?
-----Original Message-----
From: Phillips, Colin M [mailto:colin@xxxxxxxxxxx]
Sent: 14 January 2002 11:47
To: [ISAserver.org Discussion List]
Subject: [isalist] Dial Up Problem + ISA
http://www.ISAserver.org
Hello
I have an ISA Server running in Integrated mode. On the same server we
also
use Exchange 2000 to handle e-mail.
I use a dial up connection over ISDN for web access via ISA and also for
e-mail send and retrieval.
The problem is as follows:
When the Exchange Server dials out to send and retrieve e-mail, it does
this
fine. The line stays connected and then something is sending and
receiving
data continuously. I managed to stop it (i.e. disconnecting the line)
by
stopping the Web proxy service.
I thought it may have been something to do with caching in ISA Server,
so I
disabled ALL caching... but the problem is still there.
Obviously, I need to cure this problem as my client is receiving large
phone
bills...!
Below is a snippet from the logs of what I believe is causing the
problem:
#Software: Microsoft(R) Internet Security and Acceleration Server 2000
#Version: 1.0
#Date: 2002-01-12 15:10:24
#Fields: c-ip cs-username c-agent date time s-computername
cs-referred r-host r-ip r-port time-taken cs-bytes
sc-bytes cs-protocol s-operation cs-uri s-object-source
sc-status
192.168.16.2 anonymous wininet 2002-01-12 15:10:24
SERVER - - - - 10 134 - -
GET
http://.com/ - 12202
Any help MOST GREATFULLY received...
Colin
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
richard@xxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
