OK - I think I figured out the problem with my cache file after SP2. I had to go in and EXPLICITLY give full permission to the system! That's very odd, but that's what I did - and it fixed it.. Well, guess that's that.. For now.. Later all.. And thanks for all your input.. Phillip Horn Ashland Independent School District -----Original Message----- From: David Dellanno [mailto:david@xxxxxxxxxx] Sent: Thursday, August 16, 2001 10:21 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org very nice! -----Original Message----- From: Horn, Phillip - Technician [mailto:phorn@xxxxxxxxxxxxxxxxx] Sent: Thursday, August 16, 2001 10:18 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org Y'all won't believe this - but I just moved the cache file from drive E: (a storage drive) to drive D: (installation drive for 2k and ISA server), and it recreated the cache file without a hitch.. I've rebooted and it still seems ok.. I'm going to run it this way for a while and if it works, I'll add the other drive to the cache list and see what happens... Thanks for all your input so far!! I'm going home for the night... (Finally) I'll just have to work on this tomorrow... Sorry to you who have a long night ahead!! Later! Phillip -----Original Message----- From: David Dellanno [mailto:david@xxxxxxxxxx] Sent: Thursday, August 16, 2001 9:44 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org Good Luck! -----Original Message----- From: Horn, Phillip - Technician [mailto:phorn@xxxxxxxxxxxxxxxxx] Sent: Thursday, August 16, 2001 9:38 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org I have 182 files, 11 folders 25.2MB 26,482,295 bytes... Strange.. I'm going to try getting a new copy of the SP2, and if possible, I'm going to try another copy if ISA.. I'll try to let everyone know what I find out! Thanks! -----Original Message----- From: David Dellanno [mailto:david@xxxxxxxxxx] Sent: Thursday, August 16, 2001 9:33 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org I wouldn't compare the installation folder, since both of us have modified our configurations differently, but here is a snapshot of mine. 195 Files 9 Folders 24.4 MB (25,633,192 bytes) -----Original Message----- From: Horn, Phillip - Technician [mailto:phorn@xxxxxxxxxxxxxxxxx] Sent: Thursday, August 16, 2001 9:19 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org Oh - that's a little closer to mine.. lol.. Volume label is SA2KSELS_EN - the ISA folder is 208 Files, 9 Folders 22.8MB - 23,758,449 bytes -----Original Message----- From: David Dellanno [mailto:david@xxxxxxxxxx] Sent: Thursday, August 16, 2001 9:15 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org Sorry about that ISA CD 1,340 Files 60 Folders Size 268MB (281,848,882 bytes) -----Original Message----- From: Horn, Phillip - Technician [mailto:phorn@xxxxxxxxxxxxxxxxx] Sent: Thursday, August 16, 2001 9:06 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org it's an OEM copy. We get our copies from a place called Software spectrum. They sell copies of MS Media for 12 dollars, and you buy your license separate.. (State of KY contract).. Could that be it?? Hmm... -----Original Message----- From: David Dellanno [mailto:david@xxxxxxxxxx] Sent: Thursday, August 16, 2001 9:04 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org One last question, is ISA a download copy or CD copy? -----Original Message----- From: Horn, Phillip - Technician [mailto:phorn@xxxxxxxxxxxxxxxxx] Sent: Thursday, August 16, 2001 9:02 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org hmm.. You may have a point - but I don't think it would install if it were corrupt... I did download.. Maybe I'll try another download and see what happens.... -----Original Message----- From: David Dellanno [mailto:david@xxxxxxxxxx] Sent: Thursday, August 16, 2001 9:00 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org If all four installs result with the same corrupt cache, then I would question your SP2 package, is SP2 a download package or from Technet CD? If you download SP2 you might have a corrupt SP2 and you don't know it but then again you wouldn't get a successful install....ok I'm reachin' right now ;) this is a good one! -----Original Message----- From: Horn, Phillip - Technician [mailto:phorn@xxxxxxxxxxxxxxxxx] Sent: Thursday, August 16, 2001 8:54 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org Thanks, Jason. That's the same thing I've done. Installed the OS, installed SP2, and then ISA. That's when I lose my cache files. Then the updates for ISA don't help with the cache files.. It's really strange.. Maybe I'm doing something stupid or something.. That's really odd...... thanks. -----Original Message----- From: Jason Ballard [mailto:jasonb54@xxxxxxxxx] Sent: Thursday, August 16, 2001 8:43 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org Phillip, I don't do anything out of the ordinary. The servers I typically work with are Compaq DL380 or 580 servers, so I use the Smartstart to get the OS and Compaq drivers installed. I install SP2, then install ISA. The I usually apply all related hotfixes for ISA. Based on David's last post, I usually keep the cache defaults during the setup and then modify after setup has completed. Jason -----Original Message----- From: Horn, Phillip - Technician [mailto:phorn@xxxxxxxxxxxxxxxxx] Sent: Thursday, August 16, 2001 8:11 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org What does a fresh build of a server consist of when you all do it? Just briefly go through the process if you will.. Maybe I'm leaving something out... You can email me personally at phorn@xxxxxxxxxxxxxxxxx if you want. Much appreciated, Phillip -----Original Message----- From: David Dellanno [mailto:david@xxxxxxxxxx] Sent: Thursday, August 16, 2001 8:04 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Cache dies with Sp2 http://www.ISAserver.org Same here, I have built 4 production ISA stand-alone server and have not experienced such a symptom. -----Original Message----- From: Horn, Phillip - Technician [mailto:phorn@xxxxxxxxxxxxxxxxx] Sent: Thursday, August 16, 2001 7:51 PM To: [ISAserver.org Discussion List] Subject: [isalist] Cache dies with Sp2 http://www.ISAserver.org Hey everyone, I just have a quick quiestion. I've got 4 different ISA Servers that I admin, and I'm having a cache issue. Every time I install Windows 2000 SP2 on a server, my Cache file gets corrupted and can not be recovered. There have even been a couple of times when the Pagefile was destroyed. Anyone else have this problem? What's going on here? Thanks, Phillip ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: david@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: phorn@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jasonb54@xxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: phorn@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: david@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: phorn@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: david@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: phorn@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: david@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: phorn@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: david@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: phorn@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: david@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: phorn@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: david@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: phorn@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')