[Ilugc] network card activation

  • From: gnukid@xxxxxxxxx (Noorul Islam)
  • Date: Mon Aug 7 18:47:31 2006

hi,

From the modem web interface you can find out the status of WAN connection?
Find out whether you got an external IP, packet/frame loss, etc. etc..

Cheers
Noorul


On 8/7/06, Mr Right <d.srikrishnan@xxxxxxxxx> wrote:

hi,

what for is this ? what this will do ? do we have any steps that i could
follow to get my modem workable.??

Regards,
Srikrishnan.

On 8/7/06, Girish Venkatachalam <girish1729@xxxxxxxxx> wrote:



--- Mr Right <d.srikrishnan@xxxxxxxxx> wrote:

Hi,

I have BSNL Broadband connection at home. And I am
not suceeded connecting
to the internet. I have my laptop (Mandrake linux
10.1) ( which is wi-fi
enabled too), I do not know why I cannot able to get
suceeded in connecting
to internet.
I followed the following steps to configure my
WA1003A *Huawei modem*.
1. I have connected my modem to my laptop with the
ethernet cable, and
switched on the modem and my laptop.
2. And from my laptop, as a root user, I executed
the following command,
2.a,  /sbin/ifconfig  eth0 192.168.1.2 up
2.b,  /sbin/route add default gw 192.168.1.1
3.And if i do ping my to my modem 192.168.1.1 , it
respond.
4. In the browser, I have viewed the modem index,
http://192.168.1.1  and
login as admin, admin, and then in the PV0, I have
configured with my
dataone login and password.
5. And do the ping test to modem ( it works fine ).
6. And then do the modem test, it fails. And ping to
outside world not
responded.

Can any one clarify me what am i doing wrong. ?  My
intension is to
configure my modem in such a way to work wiith my
linux in wi-fi.

Any help in this regard is highly appreciated.
Wild guess

#dhclient wlan0

Regards,
Srikrishnan

On 6/18/06, Balaji Narayanan <lists@xxxxxxxxxxx>
wrote:

Arul said the following on 06/18/06 12:35:
Balaji,

I use BSNL broadband connetion.

I know that the ADSL setup is based on pppo, but
the broadband
connection  has wireless WAN connetion as well.
for enabling the
wireless WAN, i think that my system's ethernet
card has to be enabled.

My system has dual bootable(windows and linux),
in Windows, the internet
connection is fine. and have viruse problems,
but the same system, i
run the adsl-setup in linux and it is not in
active for the net.

I am not clear, how the broadband works, I think
that the wireless WAN
connection is based on the ethernet card.

I am not very sure about this. May be someone with
a similar setup can
explain.

-balaji



thanks,

arul maran

On 6/17/06, *Balaji Narayanan*
<lists@xxxxxxxxxxx
<mailto:lists@xxxxxxxxxxx>> wrote:

     >>>>> "Arul" == Arul  <maran.arul@xxxxxxxxx
    <mailto:maran.arul@xxxxxxxxx>> writes:

        Arul> Shakthi, i run -> ifconfig eth1
192.168.0.1
    <http://192.168.0.1> after that ->
        Arul> ifup eth1, it has failed same
error"Determining IP
        Arul> information for eth1 Failed".

    When you run this, your card is already
configured. Can you then try
    ping 192.168.1.1 <http://192.168.1.1> which
as you said is your
    gateway and see if it is
    working?

    Are you using an ADSL router? If yes, can
you look into its config
if
    it can be configured as a DHCP server?

    -balaji


        Arul> thanks, arul maran

        Arul> On 6/17/06, Shakthi Kannan
<cyborg4k@xxxxxxxxx
    <mailto:cyborg4k@xxxxxxxxx>> wrote:
        >>  Hi Arul,
        >>
        >> --- Arul <maran.arul@xxxxxxxxx
<mailto:maran.arul@xxxxxxxxx>>
    wrote:
        >> > How can i configure DHCP or resolve
this problem?
        >>
        >> Can you try to assign a static IP
address for eth1 and see if
        >> it get assigned? For example:
        >>
        >> ifconfig eth1 192.168.0.1
<http://192.168.0.1>
        >>
        >> SK
        >>
        >> -- Shakthi Kannan
http://www.shakthimaan.com
        >>
        >>
__________________________________________________
Do You
        >> Yahoo!?  Tired of spam?  Yahoo! Mail
has the best spam
        >> protection around
http://mail.yahoo.com
        >>
_______________________________________________ To
unsubscribe,
        >> email ilugc-request@xxxxxxxxxxxxx
    <mailto:ilugc-request@xxxxxxxxxxxxx> with
"unsubscribe <password>
        >> <address>" in the subject or body of
the message.
        >>
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
        >>
        Arul>
_______________________________________________ To
        Arul> unsubscribe, email
ilugc-request@xxxxxxxxxxxxx
    <mailto:ilugc-request@xxxxxxxxxxxxx> with
        Arul> "unsubscribe <password> <address>"
in the subject or body
of
        Arul> the message.
        Arul>
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc

<http://www.ae.iitm.ac.in/mailman/listinfo/ilugc>

    --
    http://balajin.net/blog

    BOFH excuse #112:

    The monitor is plugged into the serial port



_______________________________________________
To unsubscribe, email ilugc-request@xxxxxxxxxxxxx
with
"unsubscribe <password> <address>"
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc




--
Compromise: The art of dividing a cake in such a way
that everybody believes
he got the biggest piece !!
_______________________________________________
To unsubscribe, email ilugc-request@xxxxxxxxxxxxx
with
"unsubscribe <password> <address>"
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com




--
Compromise: The art of dividing a cake in such a way that everybody
believes
he got the biggest piece !!
_______________________________________________
To unsubscribe, email ilugc-request@xxxxxxxxxxxxx with
"unsubscribe <password> <address>"
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc

Other related posts: