Hi William ! On http://skill.freespaces.com/ you can find some SKILL Utilities that can help you. If you can't use "SameNet DRC" ( it create a lot of stupid DRC) but need to know where Via which touch pad you can use "ADV_DRC" If you use "via in pad " you can use "VIA_IN_PAD_GBR " Regards, Uri Chaplin P.S. See how I can ASSIGN_NET on Video Demo's. :) All this Utilities not free and if you like create SKILL yourself join our group on the web, go to: http://groups.yahoo.com/group/skill_school/ -----Original Message----- From: William Billereau [mailto:william.billereau@xxxxxxx] Sent: Wednesday, March 09, 2005 4:45 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] vias hole and SMT pads Hello all again. Is there a way in Allegro to check (some kind of DRCs) that via holes are not inside the SMT pad and maybe if a minimum distance is respected. I had a look in Constraints but did not find anything. Thanks. William. ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------