Thanks Ed Question for you regarding placement mode. I work remotely and when I click on placement mode it takes Allegro a minute or more to respond. As if it needs to check out a license or download a module. I don¹t see this if I¹m working on the corp network. This also happens when I try to use the manual place mode. Because of this delay I rarely use place mode. Is there a way around this? Thanks Dave On 4/9/11 7:18 AM, "Ed Hickey" <ehickey@xxxxxxxxxxx> wrote: > Here¹s a method to rotate text that does not involve function/alias key setup > or RMB menu picks. > > 1. Set your application mode to ³placement edit² (setup application > mode) > > > Or make a RMB pick in black space then access App mode menu > > > > > 2. Depress SHIFT key - Hover over text - Depress LMB and move mouse to > rotate. > > > ** consider setting super filter to ³text² to limit any selections you make in > the workspace to text. > > > > > > > > > > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary > Sent: Wednesday, April 06, 2011 5:30 PM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] rotating text while moving it > > Hey guys, > > Several years ago I set myself up (env file) to use an extra keyboard called > x-keys. > > One handy key I had was ³rotate², mainly used to adjust silk screen text. > Once you had hold of the text while in the move command, each hit of the > ³rotate² key would rotate the text 90 degrees clockwise. > It was fast and easier on the mouse hand. > > I would like to achieve this without the extra keyboard but can¹t figure it > out. > Does anyone know of any switches for the ³rotate² keyboard command? Any ideas? > > Thanks for any help with this, it really does make adjusting silk text much > easier. > > Regards, > > Gary MacIndoe > Senior PCB Layout Designer > Contract - Kelly Services > Covidien > EbD R&D > 5920 Longbow Drive > Boulder, CO 80301 > > 303.476.7458 > www.covidien.com > > P Think Green only print as needed. > >