[PCB_FORUM] Re: rotating text while moving it
- From: "Macindoe, Gary" <Gary.Macindoe@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 7 Apr 2011 10:01:07 -0400
Thanks Roberto, that did it!
I modified it slightly, using "-90" to rotate the text clockwise
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R&D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
P Think Green only print as needed.
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Roberto Torres
Sent: Wednesday, April 06, 2011 8:35 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: rotating text while moving it
Gary MacIndoe;
Try this:
Add the function key below to your local env file. I use key r.
Click the function key r to rotate during movement
funckey r iangle 90
Another handy one is:
funckey " " "pop bbdrill -cursor"
To add via during add connect.
Or
Pass your cursor over a cline, segment, via, text or shape and click "d"
to delete it. No click of the mouse!
funckey d "prepopup; pop dyn_option_select @:@Delete"
My most used.
Hope this helps
Regards
Roberto Torres
Senior Staff Designer
26650 Aliso Viejo Parkway, Aliso Viejo, CA. 92656
Phone: (949) 389-6642
www.qlogic.com
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Jean Bratton
Sent: Wednesday, April 06, 2011 4:11 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: rotating text while moving it
I didn't see any responses, so this will at least get you close....
Choose a key (I use function key F4) and either in the command line or
in the env file enter
Alias F4 rotate
Where "F4" is actually the F4 key, not the consecutive letters F 4.
This will put you in rotate mode and you can choose the rotation you
want. I'm not sure how to get it to do the single rotation of 90 degrees
as you mentioned.
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Wednesday, April 06, 2011 5:30 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] rotating text while moving it
Hey guys,
Several years ago I set myself up (env file) to use an extra keyboard
called x-keys.
One handy key I had was "rotate", mainly used to adjust silk screen
text.
Once you had hold of the text while in the move command, each hit of the
"rotate" key would rotate the text 90 degrees clockwise.
It was fast and easier on the mouse hand.
I would like to achieve this without the extra keyboard but can't figure
it out.
Does anyone know of any switches for the "rotate" keyboard command? Any
ideas?
Thanks for any help with this, it really does make adjusting silk text
much easier.
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R&D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
P Think Green only print as needed.
This correspondence and any attachments are considered confidential. If
you are not the intended recipient, please notify Freedom CAD Services,
Inc. immediately by either replying to this message or by sending an
email to operations@xxxxxxxxxxxxxx; please destroy all copies of this
message and any attachments. Thank you.
Other related posts:
