Ron, I've tried all sorts of things (even increasing the accuracy to 3 with a mils database), and nothing prevents the DRCs. So what do you setup to avoid the DRCs? Thanks, Gary E. MacIndoe PCB Design Engineer Advanced Micro Devices, Inc. Longmont, Colorado -> -----Original Message----- -> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx -> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Scott, Ron -> Sent: Wednesday, May 04, 2005 3:30 PM -> To: icu-pcb-forum@xxxxxxxxxxxxx -> Subject: [PCB_FORUM] Re: positive dynamic gnd/pwr planes in 15.2 -> -> -> I'll chime in and say I've never had problems with the dynamic shaping. -> It's just a matter of setup. -> -> Cheers, -> -> Ron Scott C.I.D. -> Texas Instruments -> Storage Products Group -> Tel: 214.567.4715 -> Cell: 972.816.7978 -> rg-scott@xxxxxx -> -> -> -> -> -----Original Message----- -> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx -> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin McCowan -> Sent: Wednesday, May 04, 2005 09:31 -> To: icu-pcb-forum@xxxxxxxxxxxxx -> Subject: [PCB_FORUM] Re: positive dynamic gnd/pwr planes in 15.2 -> -> Well, I recommend going to positive planes. -> I have and I have never looked back. Even with the little peculiarities -> I think that the benefits outweigh the drawbacks. The seeing what you -> get is a real bonus. -> You should mess around with them a little more before you decide not to -> change. -> -> Kevin -> -> Gary MacIndoe wrote: -> > Hey Kevin, -> > -> > Yeah, I'm on 15.2/XP. -> > -> > I would think that with Cadence making pretty good progress with the -> > dynamic thing, they would have fixed what I'm sure could still be -> > considered "auto void". Oh well, maybe in a few more years... So, I -> > guess I'll be sticking to negative planes, it's worked well for many -> years now. -> > -> > Thanks for the response! -> > -> > Gary E. MacIndoe -> > PCB Design Engineer -> > Advanced Micro Devices, Inc. -> > Longmont, Colorado -> > -> > -> > -> > -> > -> -----Original Message----- -> > -> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx -> > -> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Kevin -> > -> McCowan -> > -> Sent: Wednesday, May 04, 2005 6:07 AM -> > -> To: icu-pcb-forum@xxxxxxxxxxxxx -> > -> Subject: [PCB_FORUM] Re: positive dynamic gnd/pwr planes in 15.2 -> > -> -> > -> -> > -> Yeah. This is a problem. I just ignore the drc's that are around -> > -> obviously cleared places anymore. -> > -> The more decimal places you have the stupider it gets. -> > -> At 3 places it is 4.999 when it should be 5. -> > -> I am sorry to hear that they still have not fixed it in 15.2. You -> > -> are on 15.2, right? -> > -> Watch out, though. Some times it does not clear vias and pins that -> > -> it should. I have recently taken to moving the plane 0 mils (lift -> > -> and drop) to get it to regenerate the voids and that seems to work -> > -> pretty well. -> > -> -> > -> Kevin McCowan -> > -> Sr. PCB Designer -> > -> TSI Telsys -> > -> -> ----------------------------------------------------------- -> To subscribe/unsubscribe: -> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx -> with a subject of subscribe or unsubscribe -> -> To view the archives of this list please login at -> //www.freelists.org. Our list name is icu-pcb-forum or go to -> //www.freelists.org/archives/icu-pcb-forum/ -> -> Problems or Questions: -> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -> -> Want to post a job listing ? DON'T DO IT HERE! -> Better yet, join our jobs listing forum. -> -> SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx -> POST: icu-jobs-forum@xxxxxxxxxx -> ----------------------------------------------------------- -> -> ----------------------------------------------------------- -> To subscribe/unsubscribe: -> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx -> with a subject of subscribe or unsubscribe -> -> To view the archives of this list please login at -> //www.freelists.org. Our list name is icu-pcb-forum -> or go to //www.freelists.org/archives/icu-pcb-forum/ -> -> Problems or Questions: -> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -> -> Want to post a job listing ? DON'T DO IT HERE! -> Better yet, join our jobs listing forum. -> -> SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx -> POST: icu-jobs-forum@xxxxxxxxxx -> ----------------------------------------------------------- -> -> ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------