[PCB_FORUM] Re: filled pads from gerbers to dxf

Yes, I have suffered from this also, and I fix it in autocad with the hatch
commands.  In order to be able to hatch just the pins, be sure and give the
pins their own autocad layer during the dxf export setup.  In fact, you need
to have one layer for top pins and one layer for bottom pins. 


Patrick Westfeldt, Jr.
720-406-0887

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dharma Kemp
Sent: Monday, March 27, 2006 2:50 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] filled pads from gerbers to dxf

 Hello Everyone,
 We are trying to create a dxf from allegro that shows the gerbers but with
filled pads. Everything we have tried, the pads come out "hollow" but what
we need is for the pads to come out solid, like we see in the actual
gerbers. Does anyone have any ideas? Or can you at last point us in the
right direction?
Thanks in advance,
Dharma


KAW/USA Ltd. 
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax 

Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.




-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at http://www.freelists.org.
Our list name is icu-pcb-forum or go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------



-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: