[PCB_FORUM] Re: copy circuit in Allego

Thanks so much to all who responded, I will try your suggestions
Regards
Soledad

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of JACK KELLY
Sent: Friday, January 11, 2008 9:04 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: copy circuit in Allego

the way we did it before we started using modiles was copy the circuit
and then go to
logic>assign ref des 

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Soledad Attia
Sent: Friday, January 11, 2008 10:41 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] copy circuit in Allego


Hi All,

I'm working with Allegro version 15.1 using Viewlogic for the schematic
and would like to duplicate a circuit from the PCB Allegro side; When I
copy the circuit, the new components reference designators come up with
a "*", but Allegro does not allow for me to manually change them and
assign a new reference designator.
Does anyone know how to do this or How to translate this change to the
schematic?

Thanks in advance for your help
Soledad Attia
ENG Designer
Printronix Inc
Irvine, Ca

         

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: