[PCB_FORUM] copy circuit in Allego
- From: "Soledad Attia" <SAttia@xxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Fri, 11 Jan 2008 08:41:21 -0800
Hi All,
I'm working with Allegro version 15.1 using Viewlogic for the schematic
and would like to duplicate a circuit from the PCB Allegro side; When I
copy the circuit, the new components reference designators come up with
a "*", but Allegro does not allow for me to manually change them and
assign a new reference designator.
Does anyone know how to do this or How to translate this change to the
schematic?
Thanks in advance for your help
Soledad Attia
ENG Designer
Printronix Inc
Irvine, Ca
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
