But what do you mean exactly by 'should not be there'? Chris From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour Sent: Wednesday, October 06, 2010 4:25 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: XNet dilemma Edit> Properties (find filter set to Comps) > No_Xnet_Connection Or Specifically, remove the model from the component. Analyze > Model Assignment > Select the part and clear the model. ( this will come back if you reassign all models or auto assign) Hope this helps. Dave Dave Seymour Ixia www.ixiacom.com 919.267.4840 ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary Sent: Wednesday, October 06, 2010 5:17 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] XNet dilemma Hey guys, I have some XNets in my design that should not be there. I asked the DE and he said that he didn't add them in the schematic (he doesn't even know about them). Does anyone know if there is a way to remove them in Allegro? Thanks for any help. Regards, Gary MacIndoe Senior PCB Layout Designer Contract - Kelly Services Covidien EbD R&D 5920 Longbow Drive Boulder, CO 80301 303.476.7458 www.covidien.com