Sorry about that. When all else fails, remove the part, do a design sync and then add the new part in. If this does not work, you are in trouble. We are running on 16.2. Have a nice day! Shirley M. Bradley Intermec tel: 319.369.3328 shirley.bradley@xxxxxxxxxxxx ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Carrow, Dennis Sent: Wednesday, September 09, 2009 2:58 PM To: 'icu-pcb-forum@xxxxxxxxxxxxx' Subject: [PCB_FORUM] Re: Update Symbol Text HDL 16.2 That didn't seem to help. I just wanted to move the pin text around some. Here is the symbol on the schematic: Then below is what I really want it to look like. Here is the updated one I can see in "Replace Component" ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Bradley, Shirley Sent: Wednesday, September 09, 2009 2:42 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Update Symbol Text HDL 16.2 Do a component - modify and reset the filters. Shirley M. Bradley Intermec tel: 319.369.3328 shirley.bradley@xxxxxxxxxxxx ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Carrow, Dennis Sent: Wednesday, September 09, 2009 1:51 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Update Symbol Text HDL 16.2 Hello Everyone, I updated a schematic symbol's text and I can't seem to get the "new" text to show up on my schematic. I deleted the old part and put down a new one but it still has the old text associated with it. Can someone tell me the trick to get this new data to show up? (Design entry HDL 16.2)- Thanks! -DC Dennis P. Carrow PCB DESIGNER Hunter Engineering Company 11250 Hunter Drive Bridgeton, MO 63044 314-731-3020 Ext. 576 This message is intended only for the named recipient. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action based on the contents of this information is strictly prohibited. This message is intended only for the named recipient. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action based on the contents of this information is strictly prohibited.