[PCB_FORUM] Re: Ram
- From: "John LaFevers" <John_LaFevers@xxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Wed, 2 Nov 2005 11:02:14 -0500
ALL YOU CAN GET AND STEAL..!!!!!!!!!!!!!
John LaFevers
Senior PCB Designer
727-803-5441
727-278-0347
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Garrett Gilbertson
Sent: Wednesday, November 02, 2005 10:31 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Ram
Windows 15.2
This brings up a question that I have been curious about.
How much Ram do the Layout Designers suggest having?
Garrett Gilbertson
"Watts III, Nolan" <nolan.watts.iii@xxxxxxxx>
Sent by: icu-pcb-forum-bounce@xxxxxxxxxxxxx
11/02/2005 08:23 AM
Please respond to icu-pcb-forum
To: icu-pcb-forum@xxxxxxxxxxxxx
cc:
Subject: [PCB_FORUM] Pausing on commands, anyone else?
I'm seeing fairly consistent behavior out of the Allegro GUI by it pausing on
certain commands, most repeatable is the Display/Color. The first time you
invoke this it takes around 7 seconds for it to appear. Subsequent picks of it
brings it up immediately, but NOT if some considerable time has passed, say 30
minutes. It is as if there is some sort of caching going on in the UI. I've
seen this in both 15.2 and 15.5 and I'm running on high performance Precision
370 and 670 Dell's with lots of memory(>2Gb), so one might assume hardware
isn't the limiting factor. I'm wondering if this is common performance for
other users. If so, please reply. Otherwise, I'll submit a SR to Cadence.
Thanks for your help,
Nolan Watts
Other related posts:
