[PCB_FORUM] Re: PDF to Allegro
- From: "Coombs, William B. (US SSA)" <william.coombs@xxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 20 Apr 2005 08:55:40 -0400
Thank you all for your help!
I was contacted by Valor (which we have) & told that they have and add-on
feature
that does exactly what I'm looking for.
Hopefully we can arrange for a demo soon.
I will let you know how it works out
William B. Coombs
Sr. PCB Designer
BAE Systems CNIR
(973)636-7463
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Weinberg, Richard
(Richard)
Sent: Monday, April 18, 2005 3:57 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: PDF to Allegro
My solution does not apply. I can help you with importing a logo, etc.
Good luck. Let us know how it comes out.
Richard Weinberg
Agere Systems
207-846-4539
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Coombs, William B. (US
SSA)
Sent: Monday, April 18, 2005 3:53 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: PDF to Allegro
Richard,
Thanks for responding.
I want intelligent metal & body graphics.
My intent is to (hopefully) convert PDF data from a data sheet into a graphical
component template. Then I would impose this template on top of the
corresponding
footprint in Allegro to verify the footprint.
Bill
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Weinberg, Richard
(Richard)
Sent: Monday, April 18, 2005 3:46 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: PDF to Allegro
I need a clarification. Do you just want a dumb shape or intelligent metal?
Richard Weinberg
Agere Systems
207-846-4539
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Coombs, William B. (US
SSA)
Sent: Monday, April 18, 2005 3:39 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] PDF to Allegro
Hello all,
Does anyone know of a method to convert PDF data (graphical) to a format
that can be imported by Allegro?
Thanks.
William B. Coombs
Sr. PCB Designer
BAE Systems CNIR
(973)636-7463
Other related posts:
