It's always difficult to work around "Bugs". How about saving a jrl of the Rat-T moves and replaying it? The replay scripts seem to work 100% better in V15.2 than previous versions. Gerry Gerry Meier Sr. PCB Designer Freedom CAD Services, Inc. Voice: (603) 864-1300 x1350 Alt. Voice: (386) 753-0048 Email: gerry.meier@xxxxxxxxxxxxxx visit our website at<http://www.freedomcad.com -----Original Message----- From: Chris Brennan [mailto:Chris.Brennan@xxxxxxxx] Sent: Tuesday, March 22, 2005 10:35 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Moving 1000's of RATSNEST TPOINTs Hi Gerry. Yes I have done this. Some will stay, some will move if the ECSet is updated/modified. There is also a bug in the last couple of ISRs that with some ECSets if the net is partially routed and you assign a fixed_T_tolerance it causes the ECSet mapping to fail, which in turn removes the rat-t due to the mapping error, then you audit the ECSet it will pass but the rat-t's have been replaced and have moved back to their default location. Then I have to move them again. CJB Chris Brennan, C.I.D. PCB Designer Fidus Systems Inc. chris.brennan@xxxxxxxx Tel (613) 828 0063 x322 Fax (613) 828-3113 -----Original Message----- From: MAILER-DAEMON@xxxxxxxxxxxxx [mailto:MAILER-DAEMON@xxxxxxxxxxxxx] Sent: Tuesday, March 22, 2005 10:25 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Moving 1000's of RATSNEST TPOINTs Chris, After you place your T-Points, select rat-ts in find filter then Edit Properties > FIXED_T_TOLERANCE <value> 0 MIL. I have done this and it keeps the rat-Ts in place. Gerry Gerry Meier Sr. PCB Designer Freedom CAD Services, Inc. Voice: (603) 864-1300 x1350 Alt. Voice: (386) 753-0048 Email: gerry.meier@xxxxxxxxxxxxxx visit our website at<http://www.freedomcad.com -----Original Message----- From: Chris Brennan [mailto:Chris.Brennan@xxxxxxxx] Sent: Tuesday, March 22, 2005 10:17 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Moving 1000's of RATSNEST TPOINTs Hi All. I've got an extremely dense board with many different complex topologies. I want to move the rat-t's to their Physical Instantiation which is a via. They need to be placed to the exact same location as the via to the same accuracy as the board units (ie if the via is at 12004.39 8980.05 then I want the rat-t at that exact same point). This is very time consuming and I end up having to keep doing it over and over if the ECSet is modified. Does anyone know of a skill routine of some other way to have the tpoints attach to the vias automatically? Or if you can pick the via and have the rat-t snap to that point. Currently I have to show element the via, copy the via location, select and move rat-t, x paste the location, over and over and over. Any help suggestions would be appreciated. CJB Chris Brennan, C.I.D. PCB Designer Fidus Systems Inc. chris.brennan@xxxxxxxx ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------