[PCB_FORUM] Moving 1000's of RATSNEST TPOINTs

Hi All.   I've got an extremely dense board with many different complex
topologies.  I want to move the rat-t's to their Physical Instantiation
which is a via.  They need to be placed to the exact same location as
the via to the same accuracy as the board units (ie if the via is at
12004.39 8980.05 then I want the rat-t at that exact same point).  This
is very time consuming and I end up having to keep doing it over and
over if the ECSet is modified.  

Does anyone know of a skill routine of some other way to have the
tpoints attach to the vias automatically? Or if you can pick the via and
have the rat-t snap to that point.  Currently I have to show element the
via, copy the via location, select and move rat-t, x paste the location,
over and over and over. 

Any help suggestions would be appreciated.

CJB

Chris Brennan, C.I.D.
PCB Designer
Fidus Systems Inc.
chris.brennan@xxxxxxxx

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: