Sorry, I'm using 15.7. -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Marcus J. Sent: Monday, July 21, 2008 5:19 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Import/Export text blocks Which software release are you using? File->Export->Parameters will allow you export the text sizes from one design and import it into another design if you are using 16.01 ----- Original Message ----- From: "Joe.witten" < <mailto:joe.witten@xxxxxxxxxxx> joe.witten@xxxxxxxxxxx> To: < <mailto:icu-pcb-forum@xxxxxxxxxxxxx> icu-pcb-forum@xxxxxxxxxxxxx> Sent: Monday, July 21, 2008 7:49 PM Subject: [PCB_FORUM] Import/Export text blocks >I seem to remember a post where some explained how to export the list of > Allegro text blocks from one design and import them back into another. I've > searched through the archives, but I can't find the thread. Can someone > repost this or point me to it? > > Thanks, > Joe > > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to <mailto:icu-pcb-forum-request@xxxxxxxxxxxxx> icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list go to <//www.freelists.org/archives/icu-pcb-forum/> //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to <mailto:icu-pcb-forum-admins@xxxxxxxxxxxxx> icu-pcb-forum-admins@xxxxxxxxxxxxx > -----------------------------------------------------------