Hi Dave, There is a Skill file called "cds2f.il". Login into SourceLink and look for "Allegro to Fabmaster extraction utility". http://sourcelink.cadence.com/en/infomgmt/DisplayStaticLink.jhtml?/docs/files/SKILL/Allegro_SKILL_Code/welcome.html Regards, Monica -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Dave Schaefer Sent: Wednesday, April 04, 2007 10:13 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Gencad Output from Allegro We've been using Gencad format data for several of our manufacturing activities with our current toolset. We are now transitioning to Allegro, and I cannot find Gencad listed as an available output format. - Is Gencad output available directly from Allegro ? - Is there a public Allegro to Gencad conversion available (skill, extract, etc), and how do I obtain ? - Are there any recommendations for other suitable data formats (ODB++, etc) ? Thanks, Dave Dave Schaefer dave.schaefer@xxxxxxx ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------