[PCB_FORUM] Re: Gencad Output from Allegro
- From: Dave Schaefer <dave.schaefer@xxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 4 Apr 2007 13:26:26 -0500
Mitch,
We use "Gencad" in 2 areas:
1. Preparing process drawings
2. Pick and place programming
I understand there are many methods to produce the 2 items, but would be nice
if I could simply supply the same data format as our other toolset (OrCad
Layout).
Thanks,
Dave
>
> From: "Mitch S. Morey" <cadpro2k@xxxxxxxxxx>
> Date: 2007/04/04 Wed PM 12:37:05 CDT
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Gencad Output from Allegro
>
> Hi Dave,
>
> When you say Gencad format, what specifically does that address at
> manufacturing? Gerbers? Drill files? X-Y locations? Is it like the PADS
> ASCII output?
>
> Just wondering. I've used allegro for a long time, and haven't had to put
> out a "Gencad format" file before.
>
> Good day.
> Mitch
>
> >
> > We've been using Gencad format data for several of our manufacturing
> > activities with our current toolset. We are now transitioning to Allegro,
> > and I cannot find Gencad listed as an available output format.
> >
> > - Is Gencad output available directly from Allegro ?
> > - Is there a public Allegro to Gencad conversion available (skill,
> > extract, etc), and how do I obtain ?
> > - Are there any recommendations for other suitable data formats (ODB++,
> > etc) ?
> >
> > Thanks,
> > Dave
>
>
>
> -----------------------------------------
> Stay ahead of the information curve.
> Receive PCB news and jobs on your desktop daily.
> Subscribe today to the PCB CafeNews newsletter.
> [ http://www10.pcbcafe.com/nl/newsletter_subscribe.php ]
> It's informative and essential.
> This message was sent to you from a machine at 192.35.156.11
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
