[PCB_FORUM] Re: Cross probing between DxDesigner and Allegro?
- From: "Austin Franklin" <email.lists@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 8 Jun 2006 15:06:50 -0400
Hi Sue,
Does it crossprobe between Allegro PCB and DxDesigner? I know it
crossprobes between CAM350 and Allegro...but was unaware that it would also
crossprobe between the PCB layout program and the schematic capture program.
Regards
Austin
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Reade, Sue
> Sent: Thursday, June 08, 2006 2:54 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Cross probing between DxDesniger and Allegro?
>
>
> DownStreamTech has a tool that does this. It's a functional tool, but I
> find it a bit sticky sometimes, in that both tools have to be available,
> it locks up sometimes, and it's protocol is a bit awkward. I've used it
> in a test only environment and yes it does work.
>
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
> Sent: Thursday, June 08, 2006 2:50 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Cross probing between DxDesniger and Allegro?
>
> Hi,
>
> I heard a while ago that there was a company that offered a utility that
> allowed crossprobing between DxDesigner and Allegro PCB. Does anyone
> recall who makes that?
>
> Regards,
>
> Austin
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
