You're right, I misread your note. It is between Cam350 and Allegro. -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin Sent: Thursday, June 08, 2006 3:07 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Cross probing between DxDesigner and Allegro? Hi Sue, Does it crossprobe between Allegro PCB and DxDesigner? I know it crossprobes between CAM350 and Allegro...but was unaware that it would also crossprobe between the PCB layout program and the schematic capture program. Regards Austin > -----Original Message----- > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Reade, Sue > Sent: Thursday, June 08, 2006 2:54 PM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Re: Cross probing between DxDesniger and Allegro? > > > DownStreamTech has a tool that does this. It's a functional tool, but > I find it a bit sticky sometimes, in that both tools have to be > available, it locks up sometimes, and it's protocol is a bit awkward. > I've used it in a test only environment and yes it does work. > > -----Original Message----- > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin > Franklin > Sent: Thursday, June 08, 2006 2:50 PM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Cross probing between DxDesniger and Allegro? > > Hi, > > I heard a while ago that there was a company that offered a utility > that allowed crossprobing between DxDesigner and Allegro PCB. Does > anyone recall who makes that? > > Regards, > > Austin > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list go to > //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > ----------------------------------------------------------- > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list go to > //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------