[PCB_FORUM] Re: Allegro free viewer 16.3 No menu
- From: Bill Zembek <billz@xxxxxxxxxxx>
- To: "icu-pcb-forum@xxxxxxxxxxxxx" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 10 Jun 2010 09:13:48 -0400
Hi Mark,
The 16.3 menus are not loading because your are using a custom menu path that
is referencing 15.7
You are going to have to change your menu path to point to the default 16.3
Menu.
Bill Zembek
Technical Support - Allegro Specialist
EMA Design Automation, Inc.
225 Tech Park Drive
Rochester, New York 14623
Phone 585-334-6001 Opt 5
Fax 585-334-6693
www.ema-eda.com
www.timingdesigner.com
Cadence(r) OrCAD(r) Capture CIS with Digi-Key(r) Integration
View a live demo * Register Now!
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg
Sent: Thursday, June 10, 2010 8:48 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Allegro free viewer 16.3 No menu
Hello Sue,
When I type set in viewer...My menupath is set to look where it always
has for Allegro. Note: it does not include free viewer menu in path.
Wont this collide menus when opening the full Allegro?
set menupath = . C:/SPB_Data/pcbenv/menus
N:/development/pe157/pcb/menus N:/PE157/spb157/share/pcb/text/cuimenus
Regards,
Mark
Reade, Sue wrote:
> When you call up the viewer, type set on the command line. Are all paths
> pointing to that version of the viewer?
> This sounds like you may have loaded the viewer where there is a path
> collision.
>
> Sue Reade
> CAD Engineer, Hardware Engineering, NSG
> (o) +1.919.461-1047 | (m) +1.919.819-8092
>
>
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg
> Sent: Thursday, June 10, 2010 8:20 AM
> To: Cadence User Group
> Subject: [PCB_FORUM] Allegro free viewer 16.3 No menu
>
> Hi all,
> After installing free viewer v 16.3, I do not get any menu text and most
> icons are "grayed out".
>
> Can anybody tell me why or how to get it working?
>
> I have XP which is supported according to readme. Followed all
> installation defaults and uninstalled previous version first.
>
> Thanks,
> Mark
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
