Hi Richard, I was wondering if you had any response to this? I'm seeing an increase of 12K in my maintenance to move to bundles versions... What's going on for you? Pattie @};-- Senior PCB Designer, CID Ditech Networks 825 East Middlefield Rd. Mountain View, CA 94043 650-864-1762 -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of richard moffat Sent: Wednesday, November 08, 2006 6:34 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Allegro Designer to Performance Hi all Cadence wants us to change our Designer (VT2100) to Performance (PS3000, PS3100, and PS3500), as Designer is going EOL. I seem to think there was a couple of features that Designer had that the Performance option did not. By memory, it was something like constraint areas. Does anyone know of the differences or lack of functionality that may happen? Any help would he greatly appreciated. Regards, Richard __________________________ Richard Moffat PCB CAD Team Leader Allied Telesis Labs ph. +64 (3) 3393000 richard.moffat@xxxxxxxxxxxxxxxxxxx NOTICE: This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error please notify Allied Telesis Labs Ltd immediately. Any views expressed in this message are those of the individual sender, except where the sender has the authority to issue and specifically states them to be the views of Allied Telesis Labs. ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------