[PCB_FORUM] Re: Allegro Designer to Performance

Ni

No, nothing yet about any differences.

Can anyone enlighten us on this?

Cheers,
Richard

>>> "Patricia Mayer" <PMayer@xxxxxxxxxxxxxxxxxx> 11/11/2006 7:17 a.m.
>>>
Hi Richard,

I was wondering if you had any response to this? I'm seeing an increase
of 12K in my maintenance to move to bundles versions... What's going on
for you?

Pattie
@};--

Senior PCB Designer, CID
Ditech Networks
825 East Middlefield Rd.
Mountain View, CA 94043
650-864-1762


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of richard moffat
Sent: Wednesday, November 08, 2006 6:34 PM
To: icu-pcb-forum@xxxxxxxxxxxxx 
Subject: [PCB_FORUM] Allegro Designer to Performance


Hi all
 
Cadence wants us to change our Designer (VT2100) to Performance
(PS3000, PS3100, and PS3500), as Designer is going EOL.
 
I seem to think there was a couple of features that Designer had that
the Performance option did not.  By memory, it was something like
constraint areas.
 
Does anyone know of the differences or lack of functionality that may
happen?
 
Any help would he greatly appreciated.
 

Regards,
Richard

  
__________________________
Richard Moffat
PCB CAD Team Leader
Allied Telesis Labs
ph. +64 (3) 3393000
richard.moffat@xxxxxxxxxxxxxxxxxxx 

NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesis Labs Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesis Labs.
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/ 

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx 
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/ 

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx 
-----------------------------------------------------------

NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesis Labs Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesis Labs.
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: