is it possible to pull all   shapes    in one directory, separate from all others. anf if so, hoe do I set a path to it....   thanks 

-----????? ??????-----
???: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] ??? Jean Louison
????: Thursday, November 09, 2006 10:10 AM
??: icu-pcb-forum@xxxxxxxxxxxxx
????: [PCB_FORUM] Re: pin to pin checks

Hi Rachel,

You can put a "NODRC_SYM_SAME_PIN" property on the board, not to have to use many constraint areas.

Jean.


Rachel Bremner wrote:

  

Hi All,

We are not using placement outlines on our library symbols so we don't 
get drc's. I want to do a pin to pin spacing check since we have no 
outlines to check to. Is there an easy way to check pin to pin spacing 
between differing symbols and not have it check the pin to pin within 
the same device?
We don't really want to go through the whole board and put in 
constraint areas on each fine-pitch part. We've always had this built 
into the placement outlines, so it wasn't an issue before.

Thanks,
Rachel

_________________________________________________________________
Stay in touch with old friends and meet new ones with Windows Live 
Spaces 
http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href="">
://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.asp
x&mkt=en-us


-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to 
icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
//www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
----------------------------------------------------------------------
-----------------

Orange vous informe que cet  e-mail a ete controle par l'anti-virus 
mail. Aucun virus connu a ce jour par nos services n'a ete detecte.




    

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------