In message <528356b000jcgl@xxxxxxxxxxxxxxx> Jim Lesurf <jcgl@xxxxxxxxxxxxxxx> wrote: > I've not seen any response or possible explanation of the puzzle I raised > a while ago. So I thought I'd ask again in case it has been overlooked. > I've therefore quoted the original email below. > I'm puzzled by what TW may be doing that causes it to fail to load the > file on one platform (Iyonix) but be fine on the other (RPCEmu). That is not the main puzzle for this a common thing to happen. Available memory differs due to different amounts of physical/emulated RAM available, OS limitations (only 28MB of WimpSlot on OS <> 5.X), choice of WimpSlot vs. dynamic area memory, plus additional factors limiting memory usage (e.g., Aemulor). What I find puzzling is that it seems to make a difference on which platform you add the PNG. So, you were saying: Transfer File1 to Iyonix => fails to load Remove PNG on emulator, transfer as File2 to Iyonix => loads OK Add PNG on the Iyonix, save as File3 and reload => loads OK File1 and File3 should be equivalent. Please send both to me so I can check what the difference is. Martin > In article <527cbea682jcgl@xxxxxxxxxxxxxxx>, Jim Lesurf > <jcgl@xxxxxxxxxxxxxxx> wrote: >> I've been experimenting with using RPCEmu (0.8.9) rather than an Iyonix >> as the basis for writing documents using TechWriter, etc. To do this >> I've been writing the documents using TW on RPCEmu and then occasionally >> transferring the result to the Iyonix in a zip. Up until today this has >> worked perfectly. But I just encountered an odd problem. >> Having carried upzipped a document on my Iyonix when I try to load it >> into TW it fails with a TW error window that says >> Could not open <filename> because: memory full >> The document file is 1168K. About 1880 words *plus* a large PNG (1920 x >> 1080 pixels = 1146K) >> The file loads into the same version of TW in the RPC emulator, running >> on Linux (Xubuntu 11.10). >> If I remove the PNG on the emulator side and save a file which only >> differs by having the image removed, that *does* load OK into TW on the >> Iyonix. Indeed, I can then drop the PNG back in place, save the result, >> and it then is happily loaded again by TW. >> So a version where I add the PNG in the emulator isn't openable for the >> reason "memory full". But one where I add the same PNG on the Iyonix >> will then load again OK into TW. >> So why is this happening? >> My Iyonix has 512MB of ram, and most of that is free. (The emulator has >> 256MB, again most of it free.) >> FWIW I'm running RO 4.02 on the emulator, and using an old version of TW >> (8.42). That may be a factor, and it may be due to some weird bug in >> RPCEmu. But I am curious to know the cause as it could deter from using >> RPCEmu. >> Slainte, >> Jim ------------------------------------------------------------ To change, suspend or cancel your subscription go to //www.freelists.org/list/icon-users ------------------------------------------------------------