I have a 512 MB U3 drive, and works fine. On Mon, 19 May 2008 09:50:39 -0400, =?iso-8859-1?Q?tr=E9_strother?= wrote: >I have a similar drive with a one gig size which I was never able to get to >work properly with the Icon. It is a U3 Smart drive. I figured it wouldn't >launch, but I thought it migh at least open up for me, but no such luck. > >-----Original Message----- >From: icon-discuss-bounce@xxxxxxxxxxxxx >[mailto:icon-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Richard Turner >Sent: Monday, May 19, 2008 9:15 AM >To: icon-discuss@xxxxxxxxxxxxx >Subject: [icon-discuss] Re: Sandisk Cruiser and Icon Question > >I have a Sandisk cruiser and it works fine with the Braille Plus. >I've noticed that some thumb drives fit very, very tightly in the USB port. >If all Sandisk cruisers have the same design; the side that has the push out >bar, or the texture should be on the same side as the texture on the >interface cable. You will notice that one side of the cable where the USB >port is located is quite smooth. Make sure that the Sandisk is oriented the >same as the cable; smooth sides and textured sides matching. Then it should >fit and work fine. >Of course, it won't launch the "launch" program on the cruiser. > >Richard > > >-----Original Message----- >From: icon-discuss-bounce@xxxxxxxxxxxxx >[mailto:icon-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Jan Stirbens >Sent: Sunday, May 18, 2008 6:52 PM >To: icon-discuss@xxxxxxxxxxxxx >Subject: [icon-discuss] Sandisk Cruiser and Icon Question > >Hello, > >I apologize cause, in my last post, I didn't put the correct subject line, >so am re-posting. > >Is it possible to plug in a sandisk cruiser thum drive into the Icon? >I tried using cable that came with the Icon, but couldn't get it to >fit. Do I need a special adapter? >Jan Stirbens > >Icon Discuss Mailing List >icon-discuss@xxxxxxxxxxxxx >//www.freelists.org/list/icon-discuss > >To unsubscribe from the list send a blank message with unsubscribe in the >subject line to: > >icon-discuss-request@xxxxxxxxxxxxx > >To post to this list, send your message to: > >icon-discuss@xxxxxxxxxxxxx > > >For answers to the most frequently asked questions about Icon and Braille +, >Visit >the LevelStar and APH FAQ pages: >Visit the LevelStar FAQ page at >http://www.levelstar.com/support-faqs.php >Visit the APH FAQ page at >http://sun1.aph.org/webcast/brailleplus2/faq.html > >Icon Discuss Mailing List >icon-discuss@xxxxxxxxxxxxx >//www.freelists.org/list/icon-discuss > >To unsubscribe from the list send a blank message with unsubscribe in the >subject line to: > >icon-discuss-request@xxxxxxxxxxxxx > >To post to this list, send your message to: > >icon-discuss@xxxxxxxxxxxxx > > >For answers to the most frequently asked questions about Icon and Braille +, >Visit >the LevelStar and APH FAQ pages: >Visit the LevelStar FAQ page at >http://www.levelstar.com/support-faqs.php >Visit the APH FAQ page at >http://sun1.aph.org/webcast/brailleplus2/faq.html > >Icon Discuss Mailing List >icon-discuss@xxxxxxxxxxxxx >//www.freelists.org/list/icon-discuss > >To unsubscribe from the list send a blank message with unsubscribe in the >subject line to: > >icon-discuss-request@xxxxxxxxxxxxx > >To post to this list, send your message to: > >icon-discuss@xxxxxxxxxxxxx > > >For answers to the most frequently asked questions about Icon and Braille +, >Visit >the LevelStar and APH FAQ pages: >Visit the LevelStar FAQ page at >http://www.levelstar.com/support-faqs.php >Visit the APH FAQ page at >http://sun1.aph.org/webcast/brailleplus2/faq.html