Comments on slides: Slide 2: Legal <data format> selections also include Gaussian, Dual-Dirac, and DjRj. The corresponding <data> is a data-list of 2 or 3 variables. However, we have excluded Default for these cases because there is no <typ> or single value. The operation of Default becomes clearer from pending BIRD140.2: |*** For AMI parameter type 'Range', 'Increment' and 'Steps' <min value>, |*** <max value> does not imply slow and fast corners, and the user may |*** select any value provided by these parameters regardless of what |*** corner is used for the simulation. If the user does not make a |*** selection for parameter types 'Range', 'List', 'Increment' and |*** 'Steps', the EDA tool shall automatically use the value defined by |*** Default, if it exists, or the <typ value> otherwise (regardless of |*** what corner is used for the simulation). What this means is that for all Usage selections, if Default is specified, it replaces the <typ> value. All rules still apply. In all cases, including List, a <typ> value is the first entry in the set of values. For Value/Default, the Default is used instead of Value. With this interpretation, all of the questions regarding what value are clear in the remaining slides. As long as a Format is allowed, the Default rule is consistent for all Usage values. Bob -- Bob Ross Teraspeed Consulting Group, LCC http://www.teraspeed.com bob@xxxxxxxxxxxxxx Direct : 503-246-8048 Teraspeed Labs: 503-430-1065 Headquarters: 401-284-1827 Teraspeed is a registered service mark of Teraspeed Consulting Group LLC --------------------------------------------------------------------- IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/ IBIS Macro reflector: //www.freelists.org/list/ibis-macro To unsubscribe send an email: To: ibis-macro-request@xxxxxxxxxxxxx Subject: unsubscribe