[ibis-interconn] Re: Suggested Plan for IBIS Packaging and On_Die Interconnect Modeling
- From: "Muranyi, Arpad" <Arpad_Muranyi@xxxxxxxxxx>
- To: Ibis-Interconn <ibis-interconn@xxxxxxxxxxxxx>
- Date: Thu, 20 Sep 2012 17:35:20 +0000
Walter,
If the [Model] names its own power terminal names, and you
have multiple instances of the [Model], does that mean that
they will all be shorted together at their power terminals?
Thanks,
Arpad
============================================================
From: ibis-interconn-bounce@xxxxxxxxxxxxx
[mailto:ibis-interconn-bounce@xxxxxxxxxxxxx] On Behalf Of Walter Katz
Sent: Thursday, September 20, 2012 12:32 PM
To: Ibis-Interconn
Subject: [ibis-interconn] Re: Suggested Plan for IBIS Packaging and On_Die
Interconnect Modeling
All,
I neglected to add keywords [Pu Ref], [Pd Ref], [Power Camp] and [GND Clamp]
keywords to the [Model] section. These are required to identify which supply
signal_names are used by the Model.
Walter
From: Walter Katz [mailto:wkatz@xxxxxxxxxx]<mailto:[mailto:wkatz@xxxxxxxxxx]>
Sent: Thursday, September 20, 2012 11:57 AM
To: Ibis-Interconn
Subject: Suggested Plan for IBIS Packaging and On_Die Interconnect Modeling
All,
Suggested Plan for IBIS Packaging and On_Die Interconnect Modeling
Assuming that we want to have a Packaging and On_Die Interconnect Modeling
solution in ~ 6 months, with minimal impact on the IBIS (.ibs) and EBD (.ebd)
parser, I would like to make the following recommendations:
BIRD IBIS-ISS Packaging and On-Die Interconnect Modeling in IBIS (.ibs) files.
Add the following new Keywords to IBIS in the [Component] section
[IBIS-ISS Packaging Interconnect File] <file name>
[IBIS-ISS On-Die Interconnect File] <file name>
[Die Pad]
This keyword will be followed by a list of <die pad name> <signal name> to
define explicit die pad names
Intrinsic [Die Pad] names will be a list of all unique signal_names in the [Pin
Section]
Add the following keywords to the [Model] section to specify the supply
signal_names for the model
[Pu Ref] <pullup reference signal_name>
[Pd Ref] <pulldown reference signal_name>
[Power Camp] <power clamp reference signal_name>
[GND Clamp] <ground clamp reference signal_name>
Create a separate specification for
[IBIS-ISS Packaging Interconnect File]
[IBIS-ISS On-Die Interconnect File]
BIRD IBIS-ISS Interconnect Modeling in EBD (.ebd) files.
Add the following new Keywords to IBIS in the EBD section
[IBIS-ISS EBD Interconnect File] <file name>
Create a separate specification for
[IBIS-ISS EBD Interconnect File]
This will be essentially the same as [IBIS-ISS Packaging Interconnect File]
with the following exceptions
Definition of Extended Nets, each Extended Net will have (This could go in EBD
file but would be better in parameter tree format
Extended Net Name
List of EBD Pins
List of Reference Designator Map Pins
Package models will only go between EBD Pins and Reference Designator Map Pins
Walter
Walter Katz
wkatz@xxxxxxxxxx<mailto:wkatz@xxxxxxxxxx>
Phone 303.449-2308
Mobile 303.335-6156
Other related posts:
