On 04/01/2010 03:55 PM, Frances Gao wrote: Hi Frances,the port numbers are wrong because the Android build is based on an older version of HIPL. You can try to change them in /etc/hip/hipd_config:
port local 10500 port peer 10500Our servers are using the new port number. You can also set up your own server using the old port numbers. It might be a while before I have time restart the Android port. Feel free to volunteer for developing it if you have too much free time :)
Hi, The new steps: 1.Edit /data/hip/hosts : 2001:1b:a9be:c6a6:34e5:8361:c07f:a990 crossroads 193.167.187.134 crossroads 2.start hipd 3.hipconf add server rvs 193.167.187.134 5000 4.hipconf ha get all Action = 9Number of arguments : 2 Supplied 4 TYPE ARG = 2 Sending user message 22 to HIPD on socket 3 Sent 40 bytes Waiting to receive daemon info. 232 bytes received from HIP daemon HA is I1-SENT Local HIT: 2001:0010:689d:35c3:e02e:acfa:4904:ce07 Peer HIT: 2001:001b:a9be:c6a6:34e5:8361:c07f:a990 Local LSI: 1.0.0.1 Peer LSI: 1.0.0.2 Local IP: 10.0.2.15 Local NAT traversal UDP port: 50500 Peer IP: 193.167.187.134 Peer NAT traversal UDP port: 50500 Peer hostname: Seems the HA is not ESTABLISHED. My questions: 1.Is there any way to make the base exchange ESTABLISHED? 2.Under this situation,the LSI didn't work,right? I test with wget : wget http:// 1.0.0.2 ,no response. 3. The right way to use LSI ? Thanks for your time . 2010/4/1 Miika Komu <miika.komu@xxxxxxx <mailto:miika.komu@xxxxxxx>> On 01/04/10 13:23, Frances Gao wrote: Hi, Hi, 1.I just dowload the image to run and didn't update the kernel to support IPv6. I tried ping6 on adb shell,command not found. 2.Here is my steps : Without changeing /data/hip/hosts ,use "hipconf add server rvs 193.167.187.134",then hipconf get ha all. Result:Sometimes can see HA is I1-sent. 3.Here is the steps change hosts file : 1) Define the HIT and IP address mapping in /data/hip/hosts : 2001:1b:a9be:c6a6:34e5:8361:c07f:a990 193.167.187.134 crossroads.infrahip.net <http://crossroads.infrahip.net/> <http://crossroads.infrahip.net <http://crossroads.infrahip.net/>> you should have: 2001:1b:a9be:c6a6:34e5:8361:c07f:a990 crossroads 193.167.187.134 crossroads on separate lines. 2)log in adb shell and start hipd 3)hipconf add server rvs 193.167.187.134 you have supply also a life time value: hipconf add server rvs 193.167.187.134 5000 4) hipconf get ha all Result: HA is UNASSOCIATED My questions: 1.How to update the Android to support ping6?Can you list the steps for me? I am not sure how to do this, sorry. Any application with IPv6 support should be fine. Or alternatively, you can use the LSI support for IPv4 apps. 2.Are these test steps proper? No, there was some errors.