Jet, do you mean you wouldn't print structural parts out of pla? On Mar 17, 2013 4:41 PM, "j. eric townsend" <jet@xxxxxxxxxxxx> wrote: > I wouldn't print any of the structural parts with ABS due to all the > vibration and tension. But things like LED/display holders and other > non-mechanical parts should be fine. Plus, you can compost/recycle the > parts that don't work... > > On 3/17/2013 4:00 PM, Jeremy Herrman wrote: > >> No 3mm PLA but I do have a bit of 3mm nylon, and plenty of 3mm ABS >> including some cheap Chinese stuff if you'd like to see what printing >> with bad filament is like. >> >> -Jeremy >> >> On Sunday, March 17, 2013, Elijah Richter wrote: >> >> Do any of you printing folks have some 3mm PLA filament lying around >> that you aren't using (perhaps you changed to 1.75?) The mendelmax >> is coming along and I'd like to start testing with PLA filament. I >> have a few parts I'd like to eventually print for the bot itself, so >> I'd prefer black filament to match, but any color would work. >> >> -Eli >> >> >> >> -- >> @jherrm <http://twitter.com/jherrm> >> linkedin.com/in/jherrm <http://linkedin.com/in/jherrm**> >> facebook.com/herrman <http://facebook.com/herrman> >> >> > > -- > J. Eric Townsend > design: www.allartburns.org; hacking: www.flatline.net; HF: KG6ZVQ > PGP: 0xD0D8C2E8 AC9B 0A23 C61A 1B4A 27C5 F799 A681 3C11 D0D8 C2E8 > >