it's probably a charset issue. you'll have to compare the source of
messages that do with the source of messages that do not work properly.
-- Jonnie Apple Seed With his: Hands-On Technolog(eye)s
On Sep 21, 2005, at 6:14 PM, George Bell wrote:
Hi Clive,
And your screen reader, and version is.....?
If I missed that information in your message, I do apologise.
George.
-----Original Message----- From: guispeak@xxxxxxxxxxxxx [mailto:guispeak@xxxxxxxxxxxxx] On Behalf Of Clive Stevenson Sent: 21 September 2005 22:19 To: guispeak@xxxxxxxxxxxxx Subject: [guispeak] Puzzling behaviour!
Hi all,
Can any of you suggest a reason for behaviour I am experiencing when reading messages on this, and other mail-lists, I subscribe to?
Some messages will read perfectly normally whereas others remain silent as I arrow down the page, line by line. With these messages, if I use 'control plus end' to go to the end of the message and then arrow up through the message it will read all the text the message contains, only back-to-front as it were!
I am using the Turnpike v6.05 mail client, with text wrapping enabled. It is set to handle plain text and I would know if the problem messages were in HTML format because there would be a duplicate of the plain text message lodged in the list. Turnpike uses the Windows Explorer interface and should perform transparently within the Windows Environment.
The only more-or-less consistent feature of this problem is that all the messages that do not read properly have been generated using the MS Outlook Express 6.0 mail client. That does not mean to say that all messages generated, using this particular mail client, are problematic; very occasionally one will arrive that does read properly.
If anyone can suggest what might be happening or, better still, a solution to this annoying behaviour I'd be extremely grateful!
Thanks in hope...
Clive.S -- Clive Stevenson ** To leave the list, click on the immediately-following link:- ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** guispeak-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** guispeak-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** guispeak-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
