Do you see the registry extension running in the userenv and processing registry changes? Also, have you double-checked the registry keys where these values are supposed to show up? Sometimes, a policy (or in this case a preference) gets delivered but the application does not react to it as expected. Darren _____ From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Conrad, Daniel C Mr. Nortel Government Solutions Sent: Monday, August 28, 2006 11:35 AM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: GPOs not Applying It's some additional registry settings to kill the offline address book for outlook. I enabled verbose logging referencing http://technet2.microsoft.com/WindowsServer/en/library/0907105e-7856-4c93-b9 7f-a9a306623af51033.mspx?mfr=true but don't see any additional info in the userenv. I saw some USERENV(1b4.2e8) 06:47:27:250 PolicyChangedThread: UpdateUser failed with 6. So I adjusted the GP timeout. No change. Dan Conrad Nortel Government Solutions (USAMITC) Tier 3 Active Directory/Exchange Support Helpdesk: 1-800-USAMITC Direct 210-295-3196 DSN 421.3196 Email: daniel.conrad@xxxxxxxxxxxxxx _____ From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Darren Mar-Elia Sent: Monday, August 28, 2006 11:19 AM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] Re: GPOs not Applying Daniel- What types of user settings are you trying to apply? As an additional troubleshooting step it may be worth enabling verbose userenv logging and posting the relevant portion of the log file here. Darren _____ From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On Behalf Of Conrad, Daniel C Mr. Nortel Government Solutions Sent: Monday, August 28, 2006 9:14 AM To: gptalk@xxxxxxxxxxxxx Subject: [gptalk] GPOs not Applying I'm troubleshooting an issue with a site of approximately 2000 users. The problem is certain GPOs (specifically with user settings) will not apply to the users. As a troubleshooting step I've created a TEST OU and placed a test user and a test computer in the OU. I then linked a GPO with user settings to the OU. GPUpdate runs successfully and GPRESULT shows it in the correct OU but the user does not receive the GPO. Group Policy Modeling shows the same a RSOP and GPRESULT. I copied the test user. The copy gets the GPO. There is no filtering in place for this GPO. ICMP to the DC is good. Any suggestions are appreciated. Dan