[gptalk] Re: GPOs not Applying

Daniel-
What types of user settings are you trying to apply? As an additional
troubleshooting step it may be worth enabling verbose userenv logging and
posting the relevant portion of the log file here.
 
Darren

  _____  

From: gptalk-bounce@xxxxxxxxxxxxx [mailto:gptalk-bounce@xxxxxxxxxxxxx] On
Behalf Of Conrad, Daniel C Mr. Nortel Government Solutions
Sent: Monday, August 28, 2006 9:14 AM
To: gptalk@xxxxxxxxxxxxx
Subject: [gptalk] GPOs not Applying



I'm troubleshooting an issue with a site of approximately 2000 users.  The
problem is certain GPOs (specifically with user settings) will not apply to
the users.  As a troubleshooting step I've created a TEST OU and placed a
test user and a test computer in the OU.  I then linked a GPO with user
settings to the OU.   GPUpdate runs successfully and GPRESULT shows it in
the correct OU but the user does not receive the GPO.  Group Policy Modeling
shows the same a RSOP and GPRESULT.

I copied the test user.  The copy gets the GPO.

There is no filtering in place for this GPO.  

ICMP to the DC is good. 

Any suggestions are appreciated.

Dan

Other related posts: