[gps-talkusers] Re: setting 3 reference points

  • From: "Mary Ellen Earls" <meearls@xxxxxxx>
  • To: <gps-talkusers@xxxxxxxxxxxxx>
  • Date: Tue, 5 Jun 2007 10:09:08 -0700

I'd say 1. starting point as a POI 2. setting it as a destination and 3 setting it as your virtual position. 

Mary Ellen Earls
----- Original Message ----- From: "Kevin Chao" <g.unit89@xxxxxxxxxxxxx> 
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Tuesday, June 05, 2007 12:40 AM
Subject: [gps-talkusers] Re: setting 3 reference points



Mike,

Are they:
1. setting a virtual position, using your virtual as a reference via the i command 2. setting up a route such that the starting point is your reference point and using that as a reference point via the k command 

Kevin
----- Original Message ----- From: "Michael May" <mikemay@xxxxxxxxxxxxxxxx> 
To: "GPS-talkusers-freelists.org" <GPS-talkusers@xxxxxxxxxxxxx>
Sent: Monday, June 04, 2007 11:06 PM
Subject: [gps-talkusers] setting 3 reference points
We all know of course that you can set one destination and use it as a reference point. In fact, it is possible to set 3 reference points. What are the other two? 

Mike

Michael G. May

CEO Sendero Group
Crashing Through by Robert Kurson in stores May 15. Go to http://www.CrashingThrough.com 

Developers and distributors of the first-ever accessible GPS
Distributing BrailleNote, VoiceNote, Talks, Miniguide and the ID Mate bar code reader 

MikeMay@xxxxxxxxxxxxxxxx
http://www.SenderoGroup.com

1-888-757-6810, Fax (530) 757-6830, Mobile (530) 304-0007
Sendero Group, LLC
1118 Maple Lane, Davis, CA 95616-1723, USA

Latitude, 38 33 9.239 North
Longitude, 121 45 40.145 West

Other related posts:

  1. Home
  2. gps-talkusers
  3. Archive
  4. 06-2007