[gps-talkusers] Re: questions

Hi,
I don't know if it's still true, but it's worth a shot. When I got the password for mysendero it was my last name. Try using your BrailleNote's serial as the user name and your last name as the password. That should do the trick. 

Tom
----- Original Message ----- From: "Alex Hall" <mehgcap@xxxxxxx> 
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Wednesday, February 20, 2008 6:41 PM
Subject: [gps-talkusers] Re: questions



I cannot remember the first answer, but the second is simple:
1. Remove all storage devices and perform a 123 reset (hold down dots 1, 2, and 3 while pressing the reset button, releasing the reset button like normal and holding down the three dods until you hear the start up sound). 2. Insert the card on which you have stored your 4.2 software, then go to utilities > install keysoft extension (or utilities > application program) and navigate to, then press enter on, the new gps software. 
3.  Follow all prompts and you are all set.

Have a great day,
Alex


----- Original Message -----
From: "Claude Everett" <ceverett@xxxxxxxxxxxxxx
To: <gps-talkusers@xxxxxxxxxxxxx
Date sent: Wed, 20 Feb 2008 18:16:30 -0800
Subject: [gps-talkusers] questions



I know I should know the first of the questions, and the second

is probably

out there where I should find it.
The first is, what is my password for the GPS users site for

getting

software or other stuff off the site?  the second is where are

the

directions for installing the 4.20 GPS onto the BrailleNote

MPower?

Claude Everett
American by chance, Californian by choice.
Everyone has a disability, some are more aware of it than others.

Other related posts: