[gps-talkusers] Re: manual route problem
- From: Charles LaPierre <charles@xxxxxxxxxxxxxxxx>
- To: gps-talkusers@xxxxxxxxxxxxx
- Date: Wed, 17 Oct 2007 17:10:26 -0700
Hello Armando,
Without more information I don't think anyone on this list can help.
What we need to know is what exactly does the system say once you
reverse the route. Where are you physically when you reverse the
route are you in GPS mode or in Virtual mode.
If you are in GPS mode and lets say there are 10 waypoints in the
route are you physically at Waypoint 10 when you reverse the
route? What does the system say? Then when you start moving towards
waypoint 9 what does the system say when you reach it? What does the
system say when you press K for Current Waypoint (i.e the waypoint
the system is trying to lead you to next.)
Also you said this is a manual route is all the waypoints straight or
are some turns? Which mode are you in turns only or detailed (you
can find out By pressing R then I for Route Information.)
Other questions we need to know is, is your route configuration set
to Force sequential route following, and do you have auto increment
waypoints on or off. Those settings you can also get with the Route
Information command (R I)
Once we know what settings you have turned on or off and then what
mode you are in GPS or Virtual and if you are in GPS mode where is
your GPS actual location when you reverse the route, and what the
system says exactly, can we help you figure out what the system is
doing or what you need to do in order to fixed the problem.
I hope this is not overwhelming, this is part of the 3 hour phone
training you get when you buy our system, I encourage you to take
this training if you haven't already done so. Another option is to
listen to the audio tutorial on Route creation / following and
reading that section of the manual for helpful hints is another good idea.
Good luck.
Charles.
At 04:48 PM 10/17/2007, you wrote:
Hello Members,
For the last week or so, I have been having issues with my manual
route, when reversing. I created the manual route, saved it, and
reversed it and no success. The reading I get is that I'm a certain
feet behind a path and I'm not getting accurate direction. I know
the route I created, but just like another member, I'm very upset
with the GPS. Any ideas as to why I get misreadings and am not
succesful with the creation of manual routes? You're talking to an
inexperienced braillenote user, so anything to do with saving or gps
replay is foreign. Thanks.
Armando
Charles M. La Pierre CTO
Sendero Group, LLC
Lat. 37 15' 25" N Lon: 121 53' 04" W
Other related posts:
