Does Goodfeel work with Apple Macintosh? Christopher Tank Park High School Director of Bands 8040 80th St. S Cottage Grove, MN 55016 651-768-5707 Band Office 651-768-3705 fax ctank@xxxxxxxxxxxxxxxxxx -----Original Message----- From: goodfeel-bounce@xxxxxxxxxxxxx on behalf of Duke Sent: Sun 9/21/2008 6:14 PM To: goodfeel@xxxxxxxxxxxxx Subject: [goodfeel] Re: Embosser Setup for GOODFEEL 3 Oh, ok then. Have a good trip. Douk ----- Original Message ----- From: "Anne-Sophie DOUDARD" <annesophie.doudard@xxxxxxx> To: <goodfeel@xxxxxxxxxxxxx> Sent: Sunday, September 21, 2008 8:39 PM Subject: [goodfeel] Re: Embosser Setup for GOODFEEL 3 Hi Douk! I'll go to Cotonou, in Benin ----- Message d'origine ----- De : "Duke" <douk.fattah@xxxxxxxxx> A : <goodfeel@xxxxxxxxxxxxx> Envoyé : dimanche 21 septembre 2008 01:14 Objet : [goodfeel] Re: Embosser Setup for GOODFEEL 3 > Hi Anne: > Douk here. May I ask where in Africa? I am in Morocco. > Douk > ----- Original Message ----- > From: "Anne-Sophie DOUDARD" <annesophie.doudard@xxxxxxx> > To: <goodfeel@xxxxxxxxxxxxx> > Sent: Saturday, September 20, 2008 7:57 PM > Subject: [goodfeel] Re: Embosser Setup for GOODFEEL 3 > > > Hi Bill! > > I have found the embosser problem. It was an USB error. Now, Godfeel and > the > embosser work together. > > Concerning your french lessons, I have to go in Africa next week. I'll go > bach on monday the 29th. We'll schedule a time after that. > > Thanks alot for your help!!! > > Bonne soirée!! > > Anne-So > ----- Message d'origine ----- > De : "Dancing Dots" <billlist1@xxxxxxxxxxx> > A : <goodfeel@xxxxxxxxxxxxx> > Cc : <support@xxxxxxxxxxxxxxx> > Envoyé : jeudi 18 septembre 2008 13:28 > Objet : [goodfeel] Re: Embosser Setup for GOODFEEL 3 > > > Dear Anne-Sophie, > > OK, here is something to try. If this does not work, please E-mail to > support@xxxxxxxxxxxxxxx and Bryan Smart or someone else from Dancing Dots > will make an appointment with you to talk over Skype. I leave soon for > some > business in New York so I won't be able to contact you myself via Skype > over > the next couple of days. It will probably be after 18:00 hours Paris > time. > > Close everything. > > Run GOODFEEL. > > ALT+O, E for Embosser Setup > > Tab 4 times and make certain that the Generic/Text-only driver is > selected. > > OK, I think you have probably already completed these steps. Now I am > beginning to think that the hardware connection from the PC to the > embosser > needs to be checked. Also, the internal settings of the embosser may need > to be changed unless you are able to emboss from other braille software > such > as Duxbury. If the embosser never works, check to make sure that it is > set > to send information to the port being used. For example, parallel port or > serial port or USB port. > > I will contact you off-list about scheduling my French lessons. Sorry > about > that! > > Regards, > Bill > > Bill McCann > Founder and President of Dancing Dots since 1992 > www.DancingDots.com > Tel: [001] 610-783-6692 > -----Original Message----- > From: goodfeel-bounce@xxxxxxxxxxxxx [mailto:goodfeel-bounce@xxxxxxxxxxxxx] > On Behalf Of Anne-Sophie DOUDARD > Sent: Thursday, September 18, 2008 4:28 AM > To: goodfeel@xxxxxxxxxxxxx > Subject: [goodfeel] Re: Embosser Setup for GOODFEEL 3 > > Hi Bill! > > Oh I'm very sorry but my embosser doesn't work again. I have installed the > Generic Text Only but when I press the Embosser btn, nothing hapens. Can > you > help me? > > I have a second question for you, about the French lesson: You have forgot > the firs lesson on tuesday the 9 of september. Give me a moment, at night > for me, when I can give it to you! > > A tout a l'heure! > ----- Message d'origine ----- > De : "Dancing Dots" <billlist1@xxxxxxxxxxx> A : <goodfeel@xxxxxxxxxxxxx> > Envoyé : mardi 16 septembre 2008 17:21 Objet : [goodfeel] Embosser Setup > for > GOODFEEL 3 > > > Hi, > > OK, to set up your embosser: > > Run GOODFEEL. > > Options | Embosser Setup > > Tab 3 times and make sure your Embosser Device is set to "Windows > Printer". > > Tab once more and find Generic/Text-only printer in the list. If you do > not > find that driver, try any driver that looks like it is the name of an > embosser. If you don't find anything that works, you must add a Generic > Text-only printer using Control Panel | Printers and Faxes | Add Printer. > Whenever you make changes in this embosser setup dialog, do not forget to > choose "Save as Defaults" to preserve your changes for the next time you > run > GOODFEEL. > > For important information, see Page 105 of the GOODFEEL manual. You can > find it by going to Start | GOODFEEL | GOODFEEL manual in MS Word. > > Regards, > Bill > > Bill McCann > Founder and President of Dancing Dots since 1992 > www.DancingDots.com > Tel: [001] 610-783-6692 > -----Original Message----- > From: goodfeel-bounce@xxxxxxxxxxxxx [mailto:goodfeel-bounce@xxxxxxxxxxxxx] > On Behalf Of Anne-Sophie DOUDARD > Sent: Tuesday, September 16, 2008 11:06 AM > To: goodfeel@xxxxxxxxxxxxx > Subject: [goodfeel] Re: Scanning score > > Thanks for your help. > > Now, I have an other problem: my embosser doesn't want to work. I press > the > btn process, I press the btn embosser but nothint happens. What can I do! > SOS!!!!!!!!! > > ----- Message d'origine ----- > De : HYPERLINK "mailto:billlist1@xxxxxxxxxxx"Dancing Dots R : HYPERLINK > "mailto:goodfeel@xxxxxxxxxxxxx"goodfeel@xxxxxxxxxxxxx > Envoyé : mardi 16 septembre 2008 15:43 > Objet : [goodfeel] Re: Scanning score > > Dear Anne-Sophie, > > It is also important to remember to check or uncheck a box that says "Read > Lyrics" before scanning any music. > > 1. Run SharpEye. > > 2. Press CONTROL+TAB or CONTROL+F4 to close the Image Window. > > 3. ALT+O for Options; arrow down to Text Recognition Options and press > ENTER. > > 4. Tab a few times until you reach the "Read Lyrics" field. > > 5. Press SPACE to check or uncheck this box depending on whether your > music > has lyrics or not, tab to OK and press SPACE. > > I hope that this information is helpful. > > GOODFEEL will issue those warnings about "Suspicious amount of lyrics" > whenever there are too many notes and not enough words or syllables. If > there are slurs or ties missing in the music or if certain lyrics are not > properly hyphenated, errors will result. If the errors are not too severe, > you can use the Lime editor to correct them. For example, if a note is > missing a slur or a tie: > > 1. Move to the note that requires the slur or tie. > > 2. Make certain that you are not in Note Entry Mode by pressing the letter > N. (Press CONTROL+N to toggle Note Entry Mode on or off.) > > 3. Type a 0 to add a slur or type the number 9 to add a tie. > > If a syllable is missing a dash: > > 1. move to the syllable to be edited using ALT+LEFT ARROW or ALT+RIGHT > ARROW. > > 2. Press ENTER to edit the syllable. > > 3. Press LEFT arrow to move back through the letters of the syllable to > make sure that the cursor is positioned just after the final letter of the > syllable. > > 4. Type a dash. > > 5. Press the ESCAPE key to exit the edit field. > > HTH, > Bill > > > > Bill McCann > Founder and President of Dancing Dots since 1992 www.DancingDots.com > Tel: [001] 610-783-6692 > > > > _____ > > From: goodfeel-bounce@xxxxxxxxxxxxx [mailto:goodfeel-bounce@xxxxxxxxxxxxx] > On Behalf Of Anne-Sophie DOUDARD > Sent: Tuesday, September 16, 2008 6:11 AM > To: goodfeel@xxxxxxxxxxxxx > Subject: [goodfeel] Scanning score > > > Hi everybody > > I have a question about scanning score with lyrics: I have a choral score > scanned and I want to translate it in brail but, when I launch Goodfeel, I > have so mutch warning errors. It considers that lyrics are suspicious. How > can I do? > > Thank for your help > > > No virus found in this incoming message. > Checked by AVG. > Version: 7.5.516 / Virus Database: 270.6.21/1672 - Release Date: 9/15/2008 > 9:21 AM > > > > No virus found in this outgoing message. > Checked by AVG. > Version: 7.5.516 / Virus Database: 270.6.21/1674 - Release Date: 9/16/2008 > 8:15 AM > > > > No virus found in this incoming message. > Checked by AVG. > Version: 7.5.516 / Virus Database: 270.6.21/1674 - Release Date: 9/16/2008 > 8:15 AM > > > No virus found in this outgoing message. > Checked by AVG. > Version: 7.5.516 / Virus Database: 270.6.21/1674 - Release Date: 9/16/2008 > 8:15 AM > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=subscribe] > ** If this link doesn't work then send a message to: > ** goodfeel-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subjectúq] > ** or send a message, to > ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** goodfeel-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq > > No virus found in this incoming message. > Checked by AVG. > Version: 7.5.516 / Virus Database: 270.6.21/1676 - Release Date: 9/17/2008 > 9:33 AM > > > No virus found in this outgoing message. > Checked by AVG. > Version: 7.5.516 / Virus Database: 270.6.21/1676 - Release Date: 9/17/2008 > 9:33 AM > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=subscribe] > ** If this link doesn't work then send a message to: > ** goodfeel-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subjectúq] > ** or send a message, to > ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** goodfeel-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** goodfeel-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** goodfeel-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** goodfeel-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq