Dear Anne-Sophie, OK, here is something to try. If this does not work, please E-mail to support@xxxxxxxxxxxxxxx and Bryan Smart or someone else from Dancing Dots will make an appointment with you to talk over Skype. I leave soon for some business in New York so I won't be able to contact you myself via Skype over the next couple of days. It will probably be after 18:00 hours Paris time. Close everything. Run GOODFEEL. ALT+O, E for Embosser Setup Tab 4 times and make certain that the Generic/Text-only driver is selected. OK, I think you have probably already completed these steps. Now I am beginning to think that the hardware connection from the PC to the embosser needs to be checked. Also, the internal settings of the embosser may need to be changed unless you are able to emboss from other braille software such as Duxbury. If the embosser never works, check to make sure that it is set to send information to the port being used. For example, parallel port or serial port or USB port. I will contact you off-list about scheduling my French lessons. Sorry about that! Regards, Bill Bill McCann Founder and President of Dancing Dots since 1992 www.DancingDots.com Tel: [001] 610-783-6692 -----Original Message----- From: goodfeel-bounce@xxxxxxxxxxxxx [mailto:goodfeel-bounce@xxxxxxxxxxxxx] On Behalf Of Anne-Sophie DOUDARD Sent: Thursday, September 18, 2008 4:28 AM To: goodfeel@xxxxxxxxxxxxx Subject: [goodfeel] Re: Embosser Setup for GOODFEEL 3 Hi Bill! Oh I'm very sorry but my embosser doesn't work again. I have installed the Generic Text Only but when I press the Embosser btn, nothing hapens. Can you help me? I have a second question for you, about the French lesson: You have forgot the firs lesson on tuesday the 9 of september. Give me a moment, at night for me, when I can give it to you! A tout a l'heure! ----- Message d'origine ----- De : "Dancing Dots" <billlist1@xxxxxxxxxxx> A : <goodfeel@xxxxxxxxxxxxx> Envoyé : mardi 16 septembre 2008 17:21 Objet : [goodfeel] Embosser Setup for GOODFEEL 3 Hi, OK, to set up your embosser: Run GOODFEEL. Options | Embosser Setup Tab 3 times and make sure your Embosser Device is set to "Windows Printer". Tab once more and find Generic/Text-only printer in the list. If you do not find that driver, try any driver that looks like it is the name of an embosser. If you don't find anything that works, you must add a Generic Text-only printer using Control Panel | Printers and Faxes | Add Printer. Whenever you make changes in this embosser setup dialog, do not forget to choose "Save as Defaults" to preserve your changes for the next time you run GOODFEEL. For important information, see Page 105 of the GOODFEEL manual. You can find it by going to Start | GOODFEEL | GOODFEEL manual in MS Word. Regards, Bill Bill McCann Founder and President of Dancing Dots since 1992 www.DancingDots.com Tel: [001] 610-783-6692 -----Original Message----- From: goodfeel-bounce@xxxxxxxxxxxxx [mailto:goodfeel-bounce@xxxxxxxxxxxxx] On Behalf Of Anne-Sophie DOUDARD Sent: Tuesday, September 16, 2008 11:06 AM To: goodfeel@xxxxxxxxxxxxx Subject: [goodfeel] Re: Scanning score Thanks for your help. Now, I have an other problem: my embosser doesn't want to work. I press the btn process, I press the btn embosser but nothint happens. What can I do! SOS!!!!!!!!! ----- Message d'origine ----- De : HYPERLINK "mailto:billlist1@xxxxxxxxxxx"Dancing Dots Ŕ : HYPERLINK "mailto:goodfeel@xxxxxxxxxxxxx"goodfeel@xxxxxxxxxxxxx Envoyé : mardi 16 septembre 2008 15:43 Objet : [goodfeel] Re: Scanning score Dear Anne-Sophie, It is also important to remember to check or uncheck a box that says "Read Lyrics" before scanning any music. 1. Run SharpEye. 2. Press CONTROL+TAB or CONTROL+F4 to close the Image Window. 3. ALT+O for Options; arrow down to Text Recognition Options and press ENTER. 4. Tab a few times until you reach the "Read Lyrics" field. 5. Press SPACE to check or uncheck this box depending on whether your music has lyrics or not, tab to OK and press SPACE. I hope that this information is helpful. GOODFEEL will issue those warnings about "Suspicious amount of lyrics" whenever there are too many notes and not enough words or syllables. If there are slurs or ties missing in the music or if certain lyrics are not properly hyphenated, errors will result. If the errors are not too severe, you can use the Lime editor to correct them. For example, if a note is missing a slur or a tie: 1. Move to the note that requires the slur or tie. 2. Make certain that you are not in Note Entry Mode by pressing the letter N. (Press CONTROL+N to toggle Note Entry Mode on or off.) 3. Type a 0 to add a slur or type the number 9 to add a tie. If a syllable is missing a dash: 1. move to the syllable to be edited using ALT+LEFT ARROW or ALT+RIGHT ARROW. 2. Press ENTER to edit the syllable. 3. Press LEFT arrow to move back through the letters of the syllable to make sure that the cursor is positioned just after the final letter of the syllable. 4. Type a dash. 5. Press the ESCAPE key to exit the edit field. HTH, Bill Bill McCann Founder and President of Dancing Dots since 1992 www.DancingDots.com Tel: [001] 610-783-6692 _____ From: goodfeel-bounce@xxxxxxxxxxxxx [mailto:goodfeel-bounce@xxxxxxxxxxxxx] On Behalf Of Anne-Sophie DOUDARD Sent: Tuesday, September 16, 2008 6:11 AM To: goodfeel@xxxxxxxxxxxxx Subject: [goodfeel] Scanning score Hi everybody I have a question about scanning score with lyrics: I have a choral score scanned and I want to translate it in brail but, when I launch Goodfeel, I have so mutch warning errors. It considers that lyrics are suspicious. How can I do? Thank for your help No virus found in this incoming message. Checked by AVG. Version: 7.5.516 / Virus Database: 270.6.21/1672 - Release Date: 9/15/2008 9:21 AM No virus found in this outgoing message. Checked by AVG. Version: 7.5.516 / Virus Database: 270.6.21/1674 - Release Date: 9/16/2008 8:15 AM No virus found in this incoming message. Checked by AVG. Version: 7.5.516 / Virus Database: 270.6.21/1674 - Release Date: 9/16/2008 8:15 AM No virus found in this outgoing message. Checked by AVG. Version: 7.5.516 / Virus Database: 270.6.21/1674 - Release Date: 9/16/2008 8:15 AM ** To leave the list, click on the immediately-following link:- ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=subscribe] ** If this link doesn't work then send a message to: ** goodfeel-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** goodfeel-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq No virus found in this incoming message. Checked by AVG. Version: 7.5.516 / Virus Database: 270.6.21/1676 - Release Date: 9/17/2008 9:33 AM No virus found in this outgoing message. Checked by AVG. Version: 7.5.516 / Virus Database: 270.6.21/1676 - Release Date: 9/17/2008 9:33 AM ** To leave the list, click on the immediately-following link:- ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** goodfeel-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq