Joe, It's been longer for me since I last used oma, but I remember you can use the b(ulk) command to bulk-get values of your list of OM objects. oma has an extensive help file (/opt/fox/bin/tools/oma.hlp) that is a text file so you can 'more' it to your heart's content. Duc -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Joseph M. Riccardi Sent: Monday, March 23, 2015 3:57 PM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] oma? Folks, I never claimed to be a programmer so. It has been a couple of years since I have used oma but I would like to collect the values of about 6 valves every couple of seconds for about a minute during a short test. From memory, I can use oma to build a table for all 6 valves but how do I get it to run every couple of seconds? Or is there a better way for a non-programmer? Joseph M. Riccardi 386-451-7607 Cell Joe@xxxxxxxxxxxxx <mailto:Joe@xxxxxxxxxxxxx> "To give real service you must add something that cannot be bought or measured with money; and that is sincerity and integrity." - Donald A. Adams _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave