I've usually done this by: 1) Creating a pick point on the main graphic that loads P1 with the tag (C:B.SPT) and raises an overlay (generic). 2) On the overlay a) Displaying the current value Connects to $P1 b) Having a data entry box Connects to P2 c) Having a Confirm button Runs a script that validates the setpoint and either: i) Makes the change or ii) Clears P2 and re-raises the overlay d) Having a Cancel button Closes the overlay Works pretty well and can easily be implemented on your "standard" library element used for showing the setpoint. Hope this helps. Regards, Alex Johnson Invensys Process Systems Invensys Systems, Inc. 10707 Haddington Houston, TX 77043 713.722.2859 (voice) 713.722.2700 (switchboard) 713.932.0222 (fax) ajohnson@xxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of William C. Ricker Sent: Thursday, March 31, 2005 12:25 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] global variable setpoint limiting Note that a MATH block takes a quarter the space of a CALC. ==== On one site where ops entry error was a concern, we took away all numeric operator entry fields and gave them only ramp keys. Crude, but effective. ==== Regards, William C. Ricker FeedForward, Inc. Marietta, GA USA 770.426.4422 wcricker @ feedforward.com _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave