Re: [foxboro] WP51D Stand-alone
- From: "Burnham, Rob C." <rburnham@xxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Fri, 11 Mar 2005 07:04:27 -0500
Yes
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Niederberger, Kevin KR
Sent: Thursday, March 10, 2005 1:44 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] WP51D Stand-alone
=3D46rom memory I thought there was a separate CD for a D box only versio=
n
of I/A at 6.1 (or 6.1.1). Is this the one that you installed? Later
versions combined it back into the general Day 0 release.
Kevin Niederberger
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Jack Easley
Sent: Thursday, 10 March 2005 4:38 p.m.
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] WP51D Stand-alone
It will boot up with the DNBT in your test rack. The AP is not required,
although you will get an error message on the top bar of the display
manager
about an rmount pending. No bigee as far as testing goes.
Jack Easley
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On
Behalf Of Burnham, Rob C.
Sent: Wednesday, March 09, 2005 10:45 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] WP51D Stand-alone
I did the Commit and the Release Update to 6.1.1
and then Reboot, won't boot now.
I don't have the DNBT yet. I have a 8 slot rack,
so I will power up the DNBT when I get it.
I hope it doesn't have to find the Host.
Thanks Jack
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Jack Easley
Sent: Tuesday, March 08, 2005 9:12 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] WP51D Stand-alone
Shazam! I had the same experience at the end of my workday. It's been a
y=3D3D
ear
or so since I installed a WP51D, so I don't remember if it must be
connec=3D3D
ted
to the DNBT to reboot after committal at Version 6.1. Yes, there is a
set_letterbug tool in /usr/local, which I used prior to my committal, so
there is no help there.
I am going to connect this beast to it's DNBT first thing in the
morning.
However, I do know for a fact that a WP51D at Version 6.1.2 will boot
standalone, as this one was running standalone this morning prior to the
hard-drive replacement. My guess is that the WP51D boot standalone thing
=3D3D
may
work after a 6.1.1 or 6.1.2 revision level upgrade, or not : )=3D3D20
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
=3D3D
On
Behalf Of Burnham, Rob C.
Sent: Tuesday, March 08, 2005 1:42 PM
To: Foxboro free list (E-mail)
Subject: [foxboro] WP51D Stand-alone
I have a WP51D at 6.1, new hard drive.
It will eventually be connected to a DNBT
and a nodebus. Currently not connected.
After I run the COMMIT and reboot, I get:
"Configuring Network Interfaces: Program Terminated"
My failing memory has a recall of setting up a WP51D
off-line and then taking it to its final resting place, plugging
it in and away we go. Was this just a dream?
Thanks List!
Rob Burnham
Systems Engineer
Glatfelter
<http://www.glatfelter.com>
Phone 920-727-2426
Fax 920-727-2638
rburnham@xxxxxxxxxxxxxx
Beyond Paper...
is everything we do above and beyond making great paper - that
makes=3D3D
=3D3D3D
us unique
=3D3D20
=3D3D20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=3D3D20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Djoin
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Dleave
=3D3D20
=3D3D20
=3D3D20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=3D3D20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Djoin
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Dleave
=3D3D20
=3D20
=3D20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=3D20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djo=
in
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dlea=
ve
=3D20
=3D20
=3D20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=3D20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djo=
in
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dlea=
ve
=3D20
EOM=3D0A=3D0ANOTICE - This message and any attached files may contain inf=
orma=3D
tion that is confidential and/or subject of legal privilege intended only=
=3D
for use by the intended recipient. If you are not the intended recipient=
=3D
or the person responsible for delivering the message to the intended rec=
=3D
ipient, be advised that you have received this message in error and that =
=3D
any dissemination, copying or use of this message or attachment is strict=
=3D
ly forbidden, as is the disclosure of the information therein. If you hav=
=3D
e received this message in error please notify the sender immediately and=
=3D
delete the message.
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
